Catalogs >
Miller Electric Mfg. >
Bobcat? 225 and 250

Bobcat? 225 and 250
8Pages

Catalog excerpts

Bobcat 225 and 250 Industrial Applications Quick Specs Maintenance Repair Farm/Ranch Applications Fabrication Structural Steel Work Use as a Stand-Alone Generator Gas or LP Engine-Driven Welder/AC Generator Stick (SMAW) Flux-Cored (FCAW) MIG (GMAW) DC TIG (GTAW) Non-Critical AC TIG (GTAW) Air Carbon Arc (CAC-A) Cutting and Gouging (250 model only, 3/16-in. carbons) Air Plasma Cutting and Gouging with optional Spectrum models AC Stick/TIG DC Stick/TIG* FCAW/MIG *DC TIG available above 80 amps. Generator Power Output Rated at 104° F (40° C) 225/250 Peak: 11,000 W 225/250 Continuous: 9500 W 250 EFI Peak: 12,000 W 250 EFI Continuous: 10,500 W Accu-Rated™ – Not Inflated Generator Power Safer, more productive jobsite Easier mobility and uses less truck space and payload The most popular welder/generator in the industry is getting better. Building on its exceptional value, the redesigned Bobcats are: • Quieter to operate • Smaller and lighter • More fuel efficient with EFI • Easier to maintain Easier Maintenance With its intuitive design, the daily maintenance of our Bobcat welder/generators is faster and easier. Bobcat 250 EFI model shown. Welder/generator is warranted for 3 years, parts and labor. Engine is warranted separately by the engine manufacturer. Equipment Sales US and Canada An ITW Company 1635 West Spencer Street P.O. Box 1079 Appleton, WI 54912-1079 USA Phone: 866-931-9730 FAX: 800-637-2315 International Phone: 920-735-4554 International FAX: 920-735-4125

Open the catalog to page 1

Quieter and Better Sound* Easier Maintenance* Significant improvements in sound level and quality offer better jobsite communication, which provides a safer, more efficient working environment for you and your crew. Bobcat welder/generators have rotated the engine toward the front to create more S f efficient airflow, resulting in significantly quieter operation. Now you can start your job earlier in the day and end it later, as well as work around hospitals, businesses, and residential areas. With its intuitive design, the daily maintenance of our Bobcat welder/generators is faster and...

Open the catalog to page 2

Reversed Generator Airflow Exclusive engine and generator packaging design operates cooler and more efficiently. The engine is rotated towards the front to create more efficient airflow. More efficient airflow and exclusive engine location are significant contributors to reduced sound level and size reduction. Hot air recirculation is eliminated when machine is mounted in tight spots, and internal parts are kept cool for optimal performance. The Bobcat Generator Power Advantage ™ Accu-Rated — Not Inflated Generator Power Typical Equipment Power Usage Our Accu-Rated™ 11,000 watts (12,000...

Open the catalog to page 3

Specifications (Subject to change without notice.) Sound Levels at Max. Load/ at 150 Amps Rated Output at 100% Duty Cycle (at 104° F/40° C)2 Amp/Volt Ranges Welding Mode Single-Phase Generator Power Peak: 11,000 watts Continuous: 9500 watts 120/240 VAC, 88/44 A, 60 Hz Peak: 11,000 watts Continuous: 9500 watts 120/240 VAC, 88/44 A, 60 Hz EFI Model Peak: 12,000 watts Continuous: 10,500 watts Note: Derate outputs up to five percent when using LP fuel. 1) DC TIG available above 80 amps. 2) Rated at sea level. 3) Net weight without fuel. Certified by Canadian Standards Association to both the...

Open the catalog to page 4

Choose the Right Bobcat Engine Drive ™ Sound Levels At Maximum Load / At 150 Amps Compared to Previous Model Sound Quality Very Good 13 hours / 15.5 hours with EFI Good / Very Good Fuel System Typical Runtime per 12-Gallon Tank Efficiency Type Delivery Generator Watts Clean Power Quality Very Good Very Good Power While Welding Fair / Good with voltage control set near maximum Good — easier to fine tune arc with voltage control near maximum Weld Performance Stick Wire (Solid/FCAW), Steel Wire, Aluminum with Spool Gun DC TIG (Steel) AC Weld Carbon Arc Gouging Good / Very Good Very Good Fair /...

Open the catalog to page 5

Genuine Miller Options *Available as factory option. See ordering information on back page. ® GFCI Receptacles* #300 975 Field Kit contains two GFCI 120 VAC duplex receptacles. LP Gas* Liquid withdrawal LP system with vaporizer and regulator. Does not include tanks, brackets, or hose from tank to regulator. Note: Order #300 917 Hose and LP Tank Mounting Assembly separately. Electric Fuel Pump* #300 976 Field For gas models at high altitude. Improves engine starting and high-output performance. Spark Arrestor #300 924 Field Mandatory when operating on California grasslands, brush or...

Open the catalog to page 6

Genuine Miller Accessories (Continued) ® Stick (SMAW) Welding SGA 100C Control #043 857 SGA with contactor required to connect Spoolmate 3035 to CV engine drive. Includes 10-foot (3 m) 115 VAC power cable and plug, 6-foot (1.8 m) interconnecting cable, and 5-foot (1.5 m) gas hose. MIG/Flux-Cored Welding Weld Leads #173 851 2/0, 350-amp, 100 percent duty cycle. 50-foot stinger and 50-foot work cable. #043 952 2/0, 300-amp, 100 percent duty cycle. 100-foot stinger and 50-foot work cable. Plasma Cutting Spectrum 375 X-TREME and 625 X-TREME shown. Spectrum® 375 X-TREME™ #907 529 See Lit. Index...

Open the catalog to page 7

Ordering Information Equipment and Options Base model with Kohler engine Kohler engine, with GFCI Receptacles Base model with Kohler engine Kohler engine, with GFCI Receptacles Kohler engine, with Electric Fuel Pump Base model with Kohler engine Kohler engine, with GFCI Receptacles Field Options Options listed below can be added to the above packages. Installation is required. GFCI Receptacles Electric Fuel Pump Spark Arrestor Remote Oil Drain and Filter Kit Adapter Cord, Full KVA For gas models at high altitudes Front mount for Kohler See page 6. Order from Miller Service Parts Engine...

Open the catalog to page 8