GF Series Ellipticals - Mikropor - #2

-

\

For maximum flow rate, multiply flow rate shown in the above table by the correction factor corresponding to the working pressure.

- Electro-adjustable

- External float type

- Internal automatic - Manual

1) Grade A must not operate in oil saturated conditions.

2) Grade A elements should be replaced periodically to suit the applications but must be changed at least every six months.

3) Grade A will not remove certain gases including carbon monoxide and carbon dioxide. Please refer to works if in doubt.

4) Flow rates are based on a 7 bar operating pressure, for flows at other pressures use correction factor given above.

5) All filters are suitable for use with mineral and synthetic oils.

6) All above housings are supplied with internal float drain as standard. Manual drain,

Electronic timer drain,Pop-up indicator and Differential Pressure Gauge are optional accessories available upon request.

7) The above housings require only one filter element.

8) All filters are in conformity with the Pressure Equipment Directive (97/23/EC)

When ordering the housing; Please indicate the required connection size and element type. For example G35-1/2-MX denotes for G35 housing with 1/2" connection and X grade element.