| NOTES 1) Grade A must no! operate in oil saturated conditions. 2) Grade A elements should be replaced periodically to suit the applications but must be changed at least every six months. 3) Grade A will not remove certain gases including carbon monoxide and carbon dioxide. Please refer to works if in doubt. 4) Flow rates are based on a 7 bar operating pressure, for flows at other pressures use correction (actor given above. 5) All filters are suitable for use with mineral and synthetic oils. 6} Pop-up indicators supplied as standard to models. G24, G43, G25. G5G and G100. Dift. Pressure Gauge type pressure indicators are fitted to models G15Q to G2210 as standard. Also gauge type indicator can be filled to G24. G48. G25. G50and G10D 7) The above housings require only one filter element except model G3600 S) All filters are in confirmity with the Pressure Equipment Directive (97/23/EC) ORDERING The complete filter model number contains the size and grade, example - 1" general purpose filter model G250MX with replacement filter element model M250X. 250 Represent 250rrrV h capacity and x re p resents the g e nera! p urpose e I ement. rVltKRQPQR |