Air/Oil Separators - Mikropor - #2

Mikropor Conwrap" Separators are standard wrapped. They are designed for outside to inside flow and can be used with ail types of oil injection Rotary Vane and Rotary Screw compressors. Conwrap separators operate between 2 to 60 rn/min flow rate at 7 bar with 1 to 3 mg/rn oil carry over.

In order to increase the capacity of a separator and keep the dimensions the same, one alternative is to Increase the separation area. This can be achieved by pleating the separation media. The more media is used, the higher the capacity is reached.

The revolutionary Mikropor '3S' Separator is designed to fit the smaller separator housings without downgrading the operating performance. The '3S' separator has double to triple capacity when compared to a conventional separator with the same dimensions. The '3S' separator has M2 -1/3 of the volume of a conventional separator functioning In the same operating conditions. This capacity increase is achieved with the implementation of specially designed progressive type, deep bed. coalescing media using a higher number of wrap.

Mikropor Spin-On Type Air/Oii Separators are manufactured as an exchangeable element and thus permits uncomplicated and quick replacement without dismantling the compressor unit. It does not require any compressor housing. Spin-On Type Air/Oil Separators are available for 0,6 to 6 nf/min flow rates operating at 7 bar.

The most important part in the compressor affecting the service life of lubricant, alr-oi! separator and oil filter is the air intake filter. Mikropor offers a high efficiency air intake filter which out performans all the Bxisting air filters In the market. This results a long service life on air/oil separators, lubricant and oil f iter.