Text version of the page

INTELLIGENT MACHINE CONTROL INTELLIGENT MACHINE CONTROL INTELLIGENT MACHINE CONTROL

MikroDigger XC2 - 61805 of excavator guidance

TECHNICAL DATA XC2 Control Box Graphic Display:4”LCD Size (WxHxD):12x16x5 cm (4,7x6,3x2,0 in) Supply:9-28V full polarity and load dump protected Operating temperature:-40 to 70C (-40 to 160F)

MikroDigger

™

XC2Setting new standardsfor excavator guidance worldwide

Seal:Dust and waterproof (IP66)

What can I do with a MikroDigger

™ XIS1 inclination Sensor

system?

Housing:All steel

With a MikroDigger

™

the XC2 control boxwill clearly guide you to:•A preset reference depth or slope•A reference surface sloping in both directions (RS10 required)•A complex profile of up to 11 combined surfaces•You can offset your reference surface•Use a point or a string line as height reference•Use a laser (plane or slope) as reference•You can measure distances and slopes•Do blind cuts under water etc.All these information will be displayed to youon the crisp and clear LCD display of the XC2 control box.

CAN Connection:Two M12 connector Size:8x12x3 com (3,1x4,7x1,2 in) Operating angle:180 deg Operating temperature:-40 to 70C (-40 to 160F)
Bucket Side View Display Seal:Hermetically sealed (IP68)
See the sloping terrain and your bucket on this display.Check if you need to open or close the bucket or to correct the bucket height. Machine Heading Display When working with both X and Y slopes the heading of the machine is clearly displayed on the LCD display. XIS1L inclination Sensor Housing:All steel Laser window:5 cm (2,0 in) integrated laser receiver CAN Connection:Two M12 connector Size:8x12x3 (3,1x4,7x1,2 in) Operating angle:180 deg Operating temperature:-40 to 70C (-40 to 160F) Seal:Hermetically sealed (IP68)
Tilt Bucket Display The sloping terrain as well as the actual tilt of the bucket is clearly displayed on the LCD display. XIS2 inclination Sensor Housing:All steel CAN Connection:One M12 connector Size:2,5x2,5x5,0 cm (1,0x1,0x2,0 in)

Will it benefit me?

Operating angle:360 deg

The MikroDigger

Operating temperature:-40 to 70C (-40 to 160F) Seal:Hermetically sealed (IP68)
™

guidance system is essen-tially made to improve the overall perfor- mance of you and your machine. You will become more productive because you will:•Get done in fewer passes•Be able to excavate more accurately•No more over excavations•Be your own surveyor and save money•Limits the cost for ground personnel.A MikroDigger

RS10 Pitch,Roll and Direction Sensor

Is this OK? Will it fit my machine?

Housing:All steel

•Most accurate system on the market – 1 cm (0,5”) or 0.2% of the reach.•More than 30 functions•Fits any machine•4” Colour Graphic display and very easy to use.•Holds 20 different bucket settings.•100% waterproof (IP68) – no special sensors or cables needed for underwater use.•Upgradeable from single grade to dual grade.•Upgrade with tilt bucket sensor.•Upgradeable from dual grade to 3D guidance.•Bucket sensor can be mounted on the dog bone.•Often used function keys can be activated from the joystick. A MikroDigger

CAN Connection:Two M12 connector Size:Diameter 7 cm.(2,8 in)
™

guidance system can be fit-ted on any machine ranging from1 to 600 plus tons, dual booms or long reach machi- nes with a reach of more than 25m (80’) – the standard system will fit them all. And the installation is easy. A standard system is typi- cally installed and calibrated in less than 3 hours.

Hight 80 cm (31,5 in) including mast Direction sensor:360 deg ±3 deg Pitch and roll angle:180 deg Operating temperature:-40 to 70C (-40 to 160F) Seal:Dust and waterproof (IP67)
Easy navigation through menus A QuickNav™ multifunction button has been added.This button will aid the driver to quickly navigate through the XC2 menus. ™

guidance system will ensureyour future position in the ever more compe- titive construction market AUTHORIZED MIKROFYN DISTRIBUTOR:

Mikrofyn A/S · Bondovej 16 · 5250 Odense SV · Denmark · www.mikrofyn.comSince the start in 1987 Mikrofyn A/S has placed itself among the top-five worldwidemanufacturers of professional precision lasers and machine control systems.The profits of the business are reinvested in new products and growing the business.Mikrofyn is built upon sound principals of developing and manufacturingstate-of-the-art products,supported by experts and cooperating with outstandingprofessional local distributors. 04 - 2007www.kornbeck.dk

Better features – Better value

4089041GB 4.000