MD LaserReceiver - Mikrofyn - #2

Text version of the page

MD 1 features • 360° Detector with large capture range. • Battery operated, charger included (12/24V). • Detects any rotating laser beam. • 9 channels of grade data. • 5-light display. • IR-link for remote display. • Narrow/Wide switch. • 4 programmable channels allow multiple systems on a single job site (optional). • Bracket mounted with strong rubber shock absorbers. • 100% Waterproof. • Rugged transport case (optional). RD 1 features • 5-light display. • Narrow-wide switch. • Monitors battery condition in the detector. • IR-link to MD 1, MD 2 or MD 3 (no cable). • Acoustic signals. • Channel selection by dipswitch. • Supplied by power cable or an internal battery (optional). • 4 selectable channels for IR connection. MD LaserReceiver™ = no more stakes, string lines, checkers and re-work MD 40 Features • The MD 40 features 32 cm of adjustable proportional reception height with a variable on-grade position point (Variable set point). Increases the ease of setup and allows for benching during grading applications. • Accuracy = ±2.5 mm is independent of beam width and insures accurate operating results. • Capture angle is 360 degrees. • Working diameter 750 m with standard ML 2/3/4 transmitters, 1000 m with the new ML 3A & 1750 m with the ML 3/4VD. • Use with all Mikrofyn automatic control boxes (CB 1, CB 1A & CB 4). • Works with all types of lasers. • Totally water and dustproof (IP68). • Rugged military connector with quick lock. • Quick Clamp design is easy to install on fi xed or telescoping mast and insures the MD 40 is secure when mounted. • Weighing only 3.2 kg the MD 40 is light while being highly robust in design using the same physical design as the MD 10. • Physical measurements: 43 cm tall, 13 cm wide & 8.5 cm deep (23 cm including bracket). MD 10 Features: • Proportional detection - “Highest possible accuracy where you need it”. • 2.5 mm (1/10”) accuracy independent of beam width. • 360° capture range in 190 mm (8”) window. • Light and very robust design. • Works with all types of lasers. • Totally water- and dustproof (IP68). • Rugged MIL connector with quick lock to CAN bus interface. • 7 channels of grade information. How does the MD LaserReceiver™ work The MD LaserReceiver™ System consists of two primary components: • A Rotation Laser, which transmitsa laser beam with the desired inclination. • A MD LaserReceiver™, which is mounted on the machine. Once the Rotation Laser is set up with the desired slope, the MD LaserReceiver™ indicates when the machine is On-Grade. The receiver is typically mounted on a 50mm cylindrical tube. When working on an excavator, the receiver is placed on the stick or bucket. When working on a bulldozer, the receiver is placed on the centre of the bulldozer blade. When working on a grader, a receiver is placed on either one or both sides of the grader blade. In addition to the MD LaserReceiver™, an IRlinked Remote Display RD1 or RD3 can facilitate certain types of difficult jobs by moving the display inside the operator’s cab. An optional moveable IR-receiver ensures that the communication between the receiver and the remote display never is obstructed. Where to use the Machine Detector With a MD LaserReceiver™ mounted on an excavator, bulldozer, backhoe or grader, one man can produce a level or inclined grade without an assistant, and do the job by day or night. The MD LaserReceiver™ is ideal for anyone doing site preparation work, rough or fine grading, paving, excavating, trenching or preconstruction surveying for cut and fill plans. All of our MD LaserReceivers™ work with any Rotating Laser. Your benefits when using a MD Laser- Receiver™ are: • The MD LaserReceiver™ saves time as one Rotation Laser, one MD LaserReceiver™ and one machine operator can make up the entire levelling and grading team. • The MD LaserReceiver™ eliminates the unnecessary work represented by stakes, string lines, checkers and re-work. • Improves the operating accuracy of your construction equipment. Mikrofyn MD LaserReceiver™ System – the first choice when you go for durability, accuracy and efficiency The Basic System MD 3 features • 360° Detector with large capture range. • Battery operated, charger included (12/24V). • Detects any rotating laser beam. • 9 channels of grade data. • 5-light display. • IR-link for remote display. • Narrow/Wide switch. • 8-pin socket connectable to 8-wire cable to control boxes and remote display RD3. • Programmable for Symmetrical, Asymmetrical and Inverse Display. • Internal control box. • Plumb indicators for increased accuracy. • Programmable tilt range. • IR transmission of both grade and tilt to remote display. • 4 programmable channels allow multiple systems on a single job site. • Bracket mounted with strong rubber shock absorbers. • 100% Waterproof. • Rugged transport case (optional). RD 3 features • 5-light display. • Narrow-wide switch. • Monitors battery condition in the detector. • IR-link to MD 1, MD 2 or MD 3 (no cable). • Acoustic signals. • 3-light display of plumb indication. • Channel selection by dipswitch. • Supplied by power cable or an internal battery (optional). The Versatile System I N T E L L I G E N T M A C H I N E C O N T R O L I N T E L L I G E N T M A C H I N E C O N T R O L