Introducing the fifth generation of Migatronic’s MIG-series. The step regulated, robust and user-friendly welding machineshave long ago proved their capability for
quality welding, and experienced
welders
have contributed their ideas for individual
MIG Series - 14480 THE MIGATRONIC MIG-SERIES
adaptation of the perfect, flexible MIG/MAG
IN ITS FIFTH GENERATION WITH NEW USER INSPIRATION
machine. The ideas concentrate on tailor
making the machine to suit the concrete
needs and the possibility for “building on”
as future jobs make new demands.
Migatronic is meeting the challenge: With
four basic models as the starting point, it is
now possible to put together just the right
welding machine, which, with high quality
and simple handling, will get the job done - now and in the future. ce/maintenance agreement) preventlong term operational stoppages because
generally all the original spare parts can be
changed on site.As standard, the MIG series is equippedwith stand-by function for the water pump
and fan, which go on standby mode after
just a few minutes. An advantage for the
operating economy and for the environment. When in standby mode significant power savings can be made
compared to machines without this function. Wire feed unit, open
Wire feed unit, closed
FOUR TURN INTOINFINITELY MANY
MIG 305, 385, 445 and 545 are the designations for not just four, but an almost infinite number of welding machines. Theexplanation is to be found in the combination possibilities:? Power source of 305, 385, 445 or 545 A?
WHAT DO YOU NEED?
As standard, the MIG 305, 385, 445 and
545 are equipped with a long list of
advanced and user-friendly functions,and they can be supplemented with anextensive program of accessories. Air-cooled or water-cooled welding torches ? Compact or with separate wire feed units
? ? Service-friendly modular construction
? Reach with standard equipment: up to 30metres from the power source when usinga loose separate wire feed unit? Automatic short circuit fuse
?Replaceable intermediary cables with socket outlet and plug for MWF 11 and 21? On/off switch? Burn back 0.05 – 0.5 seconds
?Mode switch, soft start, post flow, burn back and spot welding time (depending on choice of model)
? Spatter-free welding with all types of gas? MWF 11 and 21 can be fitted with Push Pull systems? Several voltage regulation possibilities onthe three largest models? Complete program of accessories
?Developed and produced according to Migatronic’s ISO 9001 certified quality control system? S and CE marked? Long life span and high resale value Single or double wire feed units as special solution.?Standard welding speed from 18 metres/minute or as special solution 24 metres/minute? Prepared for five and 16 kg wire reels or the really big 250 – 400 kg reels? Water and air-cooled intermediary cables? Special solutions for special jobsNo matter which solution is chosen, the
USER-FRIENDLY,SIMPLE
AND EFFECTIVE
solid or flux cored wires of steel, aluminium and stainless steel.
TRY AND CHOSE
Come visit your local Migatronic Centre
and try to weld your own materials with the
Migatronic MIG. List your types of jobs andaccessorise the MIG/MAG welding machine, to fit your needs perfectly and at
the same time prepare it for the future. result is a Migatronic MIG, with an excellent
WIRE FEEDING WITHMANY POSSIBILITIES
duty cycle for intensive quality welding insteel, stainless steel, aluminium, copper
and bronze alloys. Well-suited for The MIG-series has a traditional build, but it is based on the advanced technologyof the Migatronic inverter machines.
Combined with the use of simple iconsand pictograms on the front panel of themachine, it creates a high degree of user-friendliness and a minimal risk for
errors.
The MIG 305-545 are equipped with an As one of the new features the Migatronic industrialwelding, field welding and repairs. MIG 305, 385, 445 and 545 can be delivered with several variants of wire feedunits with four-wheel drive. The basic
ver The MIG 305 is a new machine, developed
from customer demands for an all-roundMIG/MAG sion, the closed MWF 8, is capable of machine for welding thin sheetsof steel and aluminium and lightweight
steel 18 metres/minute, while the closed MWF11 or the MWF 21 wire feed units are capable
of 24 metres/minute and have the option
for high speed welding with MIG 545.In the new MIG generation wire reels of five
and 15 kg fit both in the closed MWF 8/11and in the open MWF 21. Using the 250 kg
wire reel is an option, which is used more
and more. constructions. The machine is air-cooled and comes both as compactor with a separate wire feed unit. inductor, which makes it possible to weld with wires from 0.6 mm to 2.4 mm - in
DEPENDABLE ANDEASY TO SERVICE
The four-wheel driven wire feeding provides
a stable, precise and steady feeding - inclu- The electronics section in the MigatronicMIG is dust free, sealed and separated
from the wire transport section. The resultis dependability, longer lifetime and lessmaintenance.
The user can change all consumables, and
vital parts are included in the Migatronic
spare parts program. The nation-wide service ding flux-cored wire - and the construction
makes it easy to change wire and rolls.
CONTROL CLOSE TOTHE WELDING SITE
Adjustment of secondary parameters issafely placed in the wire feed unit, to prevent unwanted changes after the initial
setting. Digital reading or control is done atthe front of the unit or directly from theMigatronic Dialog torch at the welding site,making remote control, in general, unnecessary.
The wire feed unit is attached centrally on
the power source and can be rotated inany direction.The Migatronic MIG machines come with
the unique Migatronic Dialog torch, which
is also standard equipped with a ball andsocket joint to relieve the
welder’s wrist.Calibratable digital V/A meters and double
wire feeder as special solution helps com-
plete the picture of a series, which covers
everything from the most simple to themost advanced quality welding. network (possibly combined with
a servi MWF 8/MWF 21/MWF11
