Catalogs >
Migatron >
RPS-325 Controller With Remote Sensing Heads

RPS-325 Controller With Remote Sensing Heads
2Pages

Catalog excerpts

RPS-325 Controller With Remote Sensing Heads - 1

RPS-325 Features Various Sensing Ranges Narrow Sensing Beam Isolated Form C Relay Output Small Electronic Controller Sealed Transducer Small Remote Transducer The RPS-325 is a high frequency, sealed transducer unit best suited for environments where dirt and moisture are a problem. The transducer head is constructed of 303 grade stainless steel with a 302 grade stainless steel sensing face. The remote transducer allows for mounting of the sensor head in cramped spaces while the controller is out of the way. The ranging and proximity modes provide the versatility of simple detection, or actual distance measuring. The isolated form C relay furnishes N.O. and N.C. outputs, and with the addition of the RPS-500 card various analog outputs are supplied. The RPS-325 sensor operates at a frequency of 150kHz for the 72" range. This sensor has a narrow sensing beam. Sensing range available for the RPS-325 is 8" to 72". Mounting flanges, LED indicator, ranging potentiometer and 6-ft. transducer cable are included. Optional cable lengths are available. Proximity Detection Ranging Measurement Proximity Detection Ranging Measurement Proximity detection is the detection of an object in a given range. The detection range of the RPS-325 is controlled by the "Range Control" potentiometer located on the front cover of the controller. Any object within the desired range is detected, while objects out of range are ignored. The detect point is independent of size, material, and reflectivity. The Proximity Option is denoted by the part number RPS-325-72. With the addition of the RPS-500 card, Analog outputs of 0-10 VDC and 4-20 mA are provided. Precise distances of an object moving to and from the transducer are measured via time intervals between transmitted and reflected bursts of ultrasonic sound. The example shows a target detected at 6 inches from the transducer and moving to 10 inches. The distance change is continuously calculated and outputted. Ranging Option is indicated by following the part number with (-500). (Example: RPS-325-72-500)

Open the catalog to page 1

RPS-325 Controller With Remote Sensing Heads - 2

Specifications: Operational Range: Power Input: * Only 120VAC or 24 VDC with 500 Analog card. Input Current: 30 Milliamps Input Current with 500 card: 50 Milliamps Ambient Temperature: Controller: Transducer Housing: Transducer: Metal Enclosed 303 Grade Stainless Steel 302 Grade Stainless Steel Sensing Face Isolated Form C Relay .5 Amp Maximum at 120VAC 12VDC Logic Signal 0 - 10VDC, 4 - 20mA Analog Outputs with Zero, Span, Sample, and Hold controls. Output with 500 card: Transducer Frequency: Response Time: Weight of Controller: Weight of Transducer: NEAR DISTANCE DISPLAY FAR SAMPLE & HOLD...

Open the catalog to page 2

RPS-325 Controller With Remote Sensing Heads 2Pages

Catalog excerpts

All Migatron catalogs and technical brochures

RPS-325 Controller With Remote Sensing Heads
2Pages