rod surface temperature sensor - MIERIJ METEO - #1

Text version of the page

Untitled table.main {} tr.row {} td.cell {} div.block {} div.paragraph {} .font0 { font:7.00pt "Arial", sans-serif; } .font1 { font:10.00pt "Arial", sans-serif; } .font2 { font:18.00pt "Arial", sans-serif; } .font3 { font:5.00pt "Verdana", sans-serif; } .font4 { font:9.00pt "Verdana", sans-serif; } .font5 { font:11.00pt "Verdana", sans-serif; } ROAD SURFACE TEMPERATURE SENSOR MODEL MT 31 Description Road Surface Température is measured on site in the asphalt road, preferably in each lane. The road sensors are suitable for dense asphalt or asphalt with an open structure or brick pavement. Mierij Meteo Road Surface Temperature sensors are manufactured to withstand all forces which are applied to the roads surface due to the traffic as well the influences of heat, cold, rain and ice. The sensor is duplex (2 internal sensors). So if the sensor is malfunctioning, the other (internal) sensor can be connected until the whole sensor can be replaced. If necessary, deep soil temperature sensors can be used. The standard Road Surface Temperature sensor is equiped with an accurate 2,252 K NTC resistor. Other internal sensor are possible like PT-100 ect. Please contact us for additional information. Technical Specifications Sensor Type Operating Range Accuracy Response time Dimensions Material Cable lenght : NTC 2252 KQ @25°C (duplex) : -20...+80°C : ±0,1°C@0°C : < 0,5s : 0 3,5 mm / length 225 mm : Stainless steel 316 :15m (Rxx cable*) / Additional length on request * Rxx cable can withstand high températures for short term while fixing the cable into the concrète road surface with compound. Viisrij Meteo +31 (0)30 2200044 ■ Fax Weltevreden 4cr 3731 AL De Bilt - Poatbun 97, 3730 AB De Bilt . +31 (0)30 22042o4 * Internet: wwy* mie ri jmeteo. n I * E-mail: i nfo@mte ri jmete:-. n I