SIS90
2Pages

{{requestButtons}}

Catalog excerpts

SIS90 - 1

KONDENSATORMIKROFONE FÜR STUDIO - UND MESSTECHNIK Schallintensitätssonde SIS 90 Kapselpaar/ Capsule pair Messbereich/ Frequency range Die Schallintensitätssonde ermöglicht durch ihre Zwei-Mikrofon-Technik neben der Messung des Schalldruckes, die Erfassung des Schalldruckgradienten und damit die Berechnung der Schallintensität. Die Sonde besteht aus zwei im Phasen- und Frequenzgang aufeinander abgestimmten Messmikrofonkapseln MK 222 (Bestellbezeichnung MK 290) und MK 301 (Bestellbezeichnung MK 390). Durch den Einsatz des 1/4” Messmikrofonvorverstärkers MV 302.1 sind Schallfeldverzerrungen (Abschattungen und Beugungen) minimal. Die Distanz zwischen beiden Mikrofonen wird über Spacer (6 mm, 12 mm, 50 mm) genau definiert. Damit sind Messungen im Frequenzbereich von 35 Hz bis 12 kHz möglich. Die Qualität der Übereinstimmung beider Messmikrofonkapseln bezüglich ihrer Übertragungsfunktionen wird entsprechend DIN EN 61043 bzw. IEC 1043 gemessen und als Druck-Restintensitätsabstand für Sonden dokumentiert. Jedem Messmikrofonkapselpaar der SIS 90 wird ein Messprotokoll beigefügt. Aus ihm ist die Einhaltung der Toleranzgrenzen für Sonden der Klasse 1 ersichtlich. Auf Kundenwunsch wird die Übereinstimmung beider Messmikrofonkapseln auch als Differenzen zwischen den Frequenz- und Phasengängen beider Mikrofone dokumentiert. In dieser Darstellung wird die Einhaltung von Phasendifferenzen und Pegeldifferenzen garantiert. Kundenspezifisch können auch gleichartige Mikrofone für andere Anwendungen oder Toleranzgrenzen selektiert werden z. B. 3-er, 4-er Gruppen bis zum speziellen Mikrofonarray oder Messmikrofonpärchen für Tieffrequenzmessungen. Sound Intensity Probe SIS 90 Due to its two-channel technology the Sound Intensity Probe makes it possible not only to measure sound pressure levels but also to record the sound pressure gradient which is needed to calculate the sound intensity. The probe consists of two Measuring Microphone Capsules MK 222 (type MK 290) and two Measuring Microphone Capsules MK 301 (type MK 390) with matched phase response and frequency response. Due to the use of two 1/4” Measuring Microphone Preamplifiers MV 302.1, sound field distortions (shadowing and diffractions) are minimal. The distance between both microphones is defined by spacers (6 mm, 12 mm, 50 mm). These enable measurements in a frequency range between 35 Hz and 12 kHz. The quality of conformance between both measuring microphone capsules with regard to their transforming functions is measured in compliance with DIN EN 61043, respectively IEC 1043 and documented as Minimum pressure-residual intensity index for probes. Each microphone capsule pair comes with a measuring protocol. It shows the tolerance limits for class 1 probes. The differences between both measuring microphone capsules can also be measured and documented according to frequency response and phase response if desired. In this representation conformance of phase differences and sound level differences are guaranteed. If specified by the customer microphones of the same kind can be selected for other applications or tolerance limits, e.g. groups of 3 or 4, special arrays or measuring microphone pairs for low-frequency measurements. MICROTECH GEFELL GMBH GEORG - NEUMANN - PLATZ D-07926 GEFELL INTERNET http://www.microtechgefell.de e-mail info@microtechgefell.de

Open the catalog to page 1
SIS90 - 2

Lieferumfang Delivery Zubehör, optional / Accessories, optional Haltegriff/Handle 10-pol. LEMO → 2 x 7-pol. LEMO/10-pin LEMO → 2 x 7-pin LEMO Fernsteuerung für RS 232/Remote control for RS 232 10-pol. LEMO → 14-pol. LEMO/10-pin LEMO → 14-pin LEMO Kabelverteiler für RS 232/Splitting box for RS 232 14-pol. LEMO, 2,5 m Kabel →/14-pin LEMO, 2,5 m cable → 2 x 0,25 m Kabel, 7-pol. LEMO/2 x 0,25 m cable, 7-pin LEMO 1 x 0,25 m Kabel, DESUB-9/1 x 0,25 m cable, DESUB-9 C 91.1, Verlängerungskabel, 14- pol. LEMO - Steckverb. 1B, Länge 10 m C 91.1, Extension cable, 14-pin LEMO - Plug 1B, length 10 m C...

Open the catalog to page 2

All Microtech Gefell GmbH catalogs and technical brochures

  1. MK 231 E

    2 Pages

  2. MK 231

    2 Pages

  3. KEM 975

    8 Pages

  4. MD 300

    4 Pages

  5. M 900 M910

    2 Pages

  6. M 300

    2 Pages

  7. M 221

    4 Pages

  8. UM92.1 s

    2 Pages

  9. CMV 563

    4 Pages

  10. M Cube

    8 Pages

  11. MK 201

    2 Pages

  12. MK 302

    2 Pages

  13. M 221

    4 Pages

  14. M 990

    2 Pages

  15. M 320

    2 Pages

  16. M 300

    2 Pages

  17. MK302

    2 Pages

  18. MV230

    2 Pages

  19. MV230USB

    2 Pages

  20. MV302

    2 Pages

  21. M360

    2 Pages

  22. MM210

    4 Pages

  23. SIS91

    2 Pages

  24. SIS92

    2 Pages

  25. SIS93

    2 Pages

  26. WME940

    2 Pages

  27. WME950

    2 Pages

  28. Pistonfon

    2 Pages

  29. MV 302

    2 Pages

  30. MD 100

    2 Pages