Catalog excerpts
Extract from our online catalogue: esf-1 ultrasonic label and splice sensors Current to: 2024-02-26 microsonic GmbH / Phoenixseestraße 7 / 44263 Dortmund / Germany / T +49 231 975151-0 / F +49 231 975151-51 / E info@microsonic.de microsonic® is a registered trademark of microsonic GmbH. All rights reserved.
Open the catalog to page 1The esf-1 fork sensor can detect labels reliably even at high label speeds. Housing in fork format with very compact dimensions IO-Link interface Smart Sensor Profile Smart Sonic Function UL Listed to Canadian and US safety standards for the detection of labels even outside the standard simplified Teach-in process for support of the new industry standard more transparency between IO-Link Devices recipe management via IO-Link Label and splice sensor as a fork sensor 3 LEDs and 1 button on the top of the housing Teach-in optionally via button or pin 5 for label/ splice detection and web...
Open the catalog to page 2Description Ultrasonic label sensor esf-1 for labeling machines The functional principle Labels are guided through the fork. An ultrasonic transmitter in the lower leg of the fork beams a fast sequence of pulses through the backing material. The sound pulses cause the backing material to vibrate such that a greatly attenuated sound save is beamed from the opposite side. The receiver in the upper leg of the fork receives this sound wave. The backing material transmits a different signal level from the label. This signal difference is evaluated by the esf-1. The signal difference between the...
Open the catalog to page 3The esf-1 can reliably detect high-transparency, reflective materials as well as metallised labels and labels of any colour. The measurement cycle time automatically self-adjusts to the sound power required. For thin labels and backing materials, the esf-1 can work at its maximum speed, with a response time of < 300 µs. To be able to detect special labels, for example labels with punches or perforations, there are three different Teach-in methods available. A) Learn both backing material and label dynamically During the Teach-in process, the backing material and its labels are guided through...
Open the catalog to page 4The Teach-in procedure can optionally be carried out with the button on the top of the housing or with pin 5 on the unit's connector. For QuickTeach the esf-1 learns the material for the duration that the button is pushed or pin 5 is controlled. With LinkControl the esf-1 can optionally be parameterised. Measured values can also be shown graphically. Labels are guided through the fork. The esf-1 reacts to the signal difference between the backing material and the label. IO-Link esf-1 ultrasonic label and splice sensors have a Push-Pull switching output and support IO-Link in version 1.1....
Open the catalog to page 5detection zone scale drawing 1 x Push-Pull working range sheeting with weights of < 20 g/m2 up to >> 400 g/m2, metal-laminated sheets and films up to 0.2 mm thick, self-adhesive films, labels on backing material design fork-like operating mode IO-Link label/splice detection particularities IO-Link Smart Sensor Profile UL Listed ultrasonic-specific means of measurement pulse operation with amplitude evaluation electrical data operating voltage Ub 20 - 30 V d.c., reverse polarity protection type of connection 4-pin M8 initiator plug esf-1 ultrasonic label and splice sensors
Open the catalog to page 6technical features/characteristics controls 1 push-button scope for settings Teach-in und QuickTeach uber Taster Teach-in uber Com-Eingang an Pin 2 LCA-2 mit LinkControl IO-Link particularities IO-Link Smart Sensor Profile UL Listed The content of this document is subject to technical changes. Specifications in this document are presented in a descriptive way only. They do not warrant any product features.
Open the catalog to page 8scale drawing detection zone 1 x Push-Pull + 1 x pnp working range design operating mode particularities sheeting with weights of < 20 g/m2 up to >> 400 g/m2, metal-laminated sheets and films up to 0.2 mm thick, self-adhesive films, labels on backing material fork-like IO-Link label/splice detection larger fork width/depth IO-Link Smart Sensor Profile ultrasonic-specific means of measurement pulse operation with amplitude evaluation electrical data operating voltage Ub 20 - 30 V d.c., reverse polarity protection type of connection 5-pin M12 initiator plug esf-1 ultrasonic label and splice...
Open the catalog to page 9housing fork width fork depth material ultrasonic transducer class of protection to EN 60529 operating temperature storage temperature weight further versions further versions 6 mm 86 mm aluminium anodized polyurethane foam, epoxy resin with glass contents IP 65 +5°C to +60°C -40°C to +85°C 80 g larger fork width/depth esf-1/15/CDF/A technical features/characteristics controls 1 push-button com input scope for settings Teach-in and QuickTeach via push-button Teach-in via com input on pin 5 LCA-2 with LinkControl IO-Link Synchronisation yes indicators 1 x LED green: working, 1 x LED yellow:...
Open the catalog to page 11scale drawing detection zone 1 x Push-Pull + 1 x pnp working range design operating mode particularities sheeting with weights of < 20 g/m2 up to >> 400 g/m2, metal-laminated sheets and films up to 0.2 mm thick, self-adhesive films, labels on backing material fork-like IO-Link label/splice detection larger fork width/depth IO-Link Smart Sensor Profile ultrasonic-specific means of measurement pulse operation with amplitude evaluation electrical data operating voltage Ub 20 - 30 V d.c., reverse polarity protection type of connection 5-pin M12 initiator plug esf-1 ultrasonic label and splice...
Open the catalog to page 12housing fork width fork depth material ultrasonic transducer class of protection to EN 60529 operating temperature storage temperature weight 6 mm 165 mm aluminium anodized polyurethane foam, epoxy resin with glass contents IP 65 +5°C to +60°C -40°C to +85°C 80 g technical features/characteristics controls 1 push-button com input scope for settings Teach-in and QuickTeach via push-button Teach-in via com input on pin 5 LCA-2 with LinkControl IO-Link Synchronisation yes indicators 1 x LED green: working, 1 x LED yellow: switch status Pin 4, 1 x LED red: switch status Pin 2 particularities...
Open the catalog to page 14All Microsonic catalogs and technical brochures
-
crm+25/D/TC/E
75 Pages
-
hps+25/DIU/TC/E/G1
44 Pages
-
mic+ ultrasonic sensors
191 Pages
-
bks ultrasonic edge sensors
13 Pages
-
bks+ ultrasonic edge sensors
10 Pages
-
crm+ ultrasonic level sensors
75 Pages
-
esp-4 label/splice sensor
17 Pages
-
hps+ ultrasonic level sensors
44 Pages
-
LCA-2
11 Pages
-
lcs ultrasonic sensors
33 Pages
-
lpc+ ultrasonic sensors
77 Pages
-
mic ultrasonic sensors
46 Pages
-
mic+ ultrasonic sensors
191 Pages
-
nano M12 ultrasonic sensor
19 Pages
-
nero ultrasonic proximity switch
100 Pages
-
pico+ ultrasonic sensors
78 Pages
-
pico+TF ultrasonic level sensors
41 Pages
-
sks ultrasonic proximity switch
18 Pages
-
ucs ultrasonic sensors
17 Pages
-
wms ultrasonic distance sensors
20 Pages
-
zws ultrasonic sensors
79 Pages
-
cube ultrasonic sensors
33 Pages
-
Online Catalogue ultrasonic sensors
172 Pages