Specifications
MECHANICAL READ RANGES
Narrow-bar-widthRead Range HIGH DENSITY (60 SPS) .005" (.127 mm)2.25" to 3" (5.72 to 7.62 cm) .0075" (.191 mm)2" to 3.5" (5.08 to 8.89 cm) LOW DENSITY (100 SPS) .0075" (.191 mm)2.5" to 4.5" (6.35 to 11.43 cm) .010" (.254 mm)2" to 5.5" (5.08 to 13.97 cm) .015" (.381 mm)2" to 6.5" (5.08 to 16.51 cm).020" (.508 mm)2" to 7.25" (5.08 to 18.42 cm) PIN ASSIGNMENTS: 9-pin mini-DIN socket STATUS LIGHTS
Pin No.RS-232 RS-422/485 LEDColorCondition Pin Function Pin Function PowerYellowOn power-on 1+5 VCC (in)+5 VCC (in) LEDStatusGreenNormal operations:LEDilluminates whenevera bar code label isdecoded and remainson until a new triggeroccurs.Continuous Read orContinuous Read 1Output: flash for eachgood read. a a SAFETY CERTIFICATIONS
2Output-1 TTL Output-1 TTL CDRH, FCC,CE, TüV, BSMI and UL/cUL
3RS-232 RxDTxD (+) 4Signal groundSignal ground 5RS-232 TxDTxD (–) 6Trigger inputTrigger input 7Default pinDefault pin 8Output-2 TTL (+) a RXD (+) 9RS-485 driver enableRXD (–) ShieldChassis ground b Chassis ground a. Can sink 3.5 mA or source 60 µA b. LASER LIGHT
Chassis and signal ground connectedinternally through Ø OHM Resistor. Type: Safety class: Semiconductor visible
laser diode(670 nm nominal) CDRH Class II SCANNING PARAMETERS Type: Scan rate: Pitch: 10-sided, single line or raster,spinning mirror ±50° High Density - 60 scans persecond. Low Density - 100 scans persecond Scan width: Skew: ±40° 4" (10.16 cm) at 2.75"(6.99 cm) from window (7.5 mil and
larger bar widths) Label contrast: 25% min. absolute darkto light differential at 670 nm wave-
length COMMUNICATION Interface: RS-232 or RS-422/485(option)
CAUTION LASER LIGHT DO NOT STARE INTO BEAM . . PROTOCOLS
670 nm DIODE LASER1.0 MILLIWATT MAXIMUM CLASS II LASER PRODUCT Point-to-Point • Point-to-Point w/Xon/Xoff • Polling Mode D • Multidrop • Userdefined • User defined multidrop
ISO 9001 /
Cert. No. US96/0465 CONNECTORS
©2002 Microscan Systems, Inc. 5/02All rights reserved.Specifications subject to change.Product specifications are given for typicalperformance at 25°C (77°F) using grade A
Code 39 labels. Some performance
characteristics may vary at high temperatures
or other environmental extremes. Type: 9-pin mini-DIN socket connector ELECTRICAL
Warranty– One year limited warranty on partsand labor. Extended warranty available. Power requirement: +5 VDC ±4% at200 mA ENVIRONMENTAL Weight: Approximately 3 oz. (85 g) Humidity: Housing: Operating temperature: Storage temperature: NEMA 12, IP54 when usedwith specified connector Up to 90% (non-condensing) –50° to 75°C(–63° to 167°F) 0° to 40°C(32° to 104°F)
Microscan Europe EMISSIONS
Microscan Systems, Inc. Radiated and conducted:
Tel 425 226 5700 / 800 251 7711
Fax 425 226 8250 EN 55022:98, Class B
Tel 31 172 423360 / Fax 31 172 423366 Microscan Asia Pacific R.O. Tel 65 6846 1214 / Fax 65 6846 4641 Part of a full range of sales tools available from our web site: www.microscan.com
Tech support: helpdesk@microscan.com Product information: info@microscan.com