IC-3USB
2Pages

Catalog excerpts

IB–3 and IC–3 Series IB-3 and IC-3 series devices are designed for use with all microscan 5V, 15 pin barcode readers. Easy-to-Use Switch The IB-3PC is a dual-purpose interface device that operates in two different operating modes (selectable by switch): Keyboard Wedge: PC Style Connector • Data is sent to PC’s keyboard port. • Keyboard is connected to IB-3PC. • Power is taken from PC’s keyboard port. Serial Interconnect: • Communication is via DB-9, RS-232 serial port. • Power is provided from a 5 VDC power supply with keyboard style connector or taken from a PC’s keyboard port. IC–3USB The IC-3USB allows the barcode reader to be connected to a PC’s USB 1.X connector. • When the barcode reader is connected through the IC-3USB, its data is compatible with the USB 1.X protocol. • The IC-3USB allows the barcode reader to draw 5 VDC from the USB connector, thus allowing the IC-3USB and a reader to function without an external power supply. IC–332 The IC-332 allows the barcode reader to be connected to the IB-131. • The IC-332 provides 5-VDC for the barcode reader from the 10-28 VDC power which is connected to the IB-131. • The IC-332 provides optoisolation for the trigger input and programmable outputs of the barcode reader. Provides Optoisolation For more information on this product, visit www.microscan.com.

Open the catalog to page 1

ELECTRICAL SCANNER CONNECTOR 15 Pin D-sub Plug Power: PS/2 port powered, 5 VDC, +/- 5%, 200mV p-p Pin HOST In/Out Pin HOST RS232 RS232 max. ripple, 260 mA & 50 mA @ 5 VDC(typ.) (scanner 1 Power +5 Out 9 NC and wedge) VDC 10 NC CE MARK General immunity: EN 55024: 1998 ITE Immunity Standard Radiated and conducted emissions of ITE equipment: EN 55022:98 ITE Disturbances 21" (533.4 mm) TxD RxD Power/ Signal Ground NC NC NC Default PS/2 KEYBOARD CONNECTOR 6 Pin PS/2 Socket and Plug HOST CONNECTOR 9 Pin D-sub Plug Signal Data NC GND +5 Clock NC ELECTRICAL Power: USB bus powered, 5 VDC, +/- 5%,...

Open the catalog to page 2