NC500SM Series - Micronetics - #1

The NC500SM Noise Source series is an economical solution for built-in test applications. These small surface mount modules are self-contained with all the bias circuits, eliminating the need for external components.

Insensitive to temperature variations, these modules produce extremely flat out­put power versus frequency characteristics. The modules typically require <10 mAand produce a minimum of 31 dB ENR of white Gaussian noise.

• Frequency: 200 kHz to 3.5 GHz

• Crest Factor: 5:1

• Temperature Coefficient: 0.015 dB/C°

• Supply Sensitivity: 0.2 dB / %V

• Operating Temperature: 0°C to +70°C

• Storage Temperature -65°C to +125°C

3A.BBA dB 33.995 dB 34.231 dB 32.719 dB

-7.438 dB -1.389 dB

30.00|_|__

Start 10.00 MHz Tcold 0.00 K

BH 4 MHz flvgs Off

Points 101 Rtt 0/0 dB

Stop 4.0 Loss Off

Typical applications for Micronetics NC500SM Noise Source Series include:

• Built-in test equipment (BITE)

• Test signal strength in PCS, CATV

• Calibrators

• Radar warning receivers

• Spectrum analyzers

• Dithering A/D quantization error

• Gain-bandwidth product testing

Notes: place EVAL at the end of the model number to order a connectorlzed evaluation board

MICRONETICS, HUDSON, NH 03051 / TEL: 603-883-2900 / FAX: 603-882-8987 / EMAIL: NOISESALES@MICRONETICS.COM / WWW.MICRONETICS.COM