Micromeritics Products Brochure
11Pages

{{requestButtons}}

Catalog excerpts

Micromeritics Products Brochure - 2

Carefully engineered to perform surface area and porosity measurements, the physisorption line of instruments determines the quality and utility of a wide range of materials. Though different materials can appear to be identical, variations in the surface area and porosity can greatly influence the material’s performance characteristics. Micromeritics offers a large selection of gas sorption analyzers that will fulfill demanding requirements for determining surface area and porosity. Sample Ports Pore Size Range micro Low Surface Area Measurement * Micropore analysis can be performed on the...

Open the catalog to page 2
Micromeritics Products Brochure - 3

The TriStar II is an automated, three-station, surface area and porosity analyzer capable of increasing the speed of quality control analyses with the accuracy, resolution, and data reduction features to meet most research requirements. Simultaneous and independent analysis of up to three samples – four TriStars can be operated from a single computer. • Three analysis stations operate simultaneously and independently of one another • The standard nitrogen system can also accommodate the use of argon, carbon dioxide, and other non-corrosive gases. A krypton option allows measurements in the...

Open the catalog to page 3
Micromeritics Products Brochure - 4

The ASAP 2420 system is designed for high-performance/high sample throughput. With six independently operated analysis stations, a new analysis can begin as soon as another is finished. • Six independently operated analysis stations • Programmable and fully automated sample preparation module with twelve independently operated stations • A low surface area option using krypton as an adsorptive can measure total surface areas • With low-pressure dosing and equilibration modes, a micropore option allows micropore analyses to be performed concurrently on all six independently operated analysis...

Open the catalog to page 4
Micromeritics Products Brochure - 5

The ChemiSorb 2720 and 2750 utilize the dynamic (flowing gas) technique to study physical or chemical adsorption. The ChemiSorb is an affordable option for those who require both chemisorption and physisorption analyses. ChemiSorb 2720 – Dual station, one for analysis and one for sample preparation ChemiSorb 2750 – Dual-function sample station can be used as either a sample station or degas station, permitting in situ sample preparation. Three built-in preparation gas inlets and four carrier gas inlets allow for a variety of experiments without having to disconnect, reconnect, and purge gas...

Open the catalog to page 5
Micromeritics Products Brochure - 6

The SediGraph III analyzer combines the proven SediGraph analytical technique with advanced instrumentation features to provide superior repeatability, accuracy, and reproducibility. The SediGraph III uses x-ray absorption to measure mass concentration and Stokes’ Law to determine particle size. • Range of 0.1 to 300 µm • Complete sample mass accountability – accounts for material outside the measurement range • Direct measurement of mass fraction • Reports mass distribution by particle size and settling velocity • Correlates well to classical sedimentation methods • Optional MasterTech 052...

Open the catalog to page 6
Micromeritics Products Brochure - 7

MERCURY INTRUSION POROSIMETRY Sample Ports AutoPore IV Series Pore Size Range meso The AutoPore IV series uses mercury intrusion and extrusion to determine total pore volume, pore size distribution, percent porosity, density, compaction/compression and fluid transport properties. • Available with two low-pressure ports and one high-pressure port or four low-pressure ports and two high-pressure ports for increased sample throughput • Enhanced data reduction package includes tortuosity, permeability, compressibility, pore-throat ratio, fractal dimension, Mayer-Stowe particle size...

Open the catalog to page 7
Micromeritics Products Brochure - 8

The GeoPyc utilizes a quasi-fluid displacement medium composed of non-hazardous microspheres having a high degree of flowability that do not wet the sample or fill its pores. • Determines envelope volume and density of monolithic samples as well as the bulk volume and density of powdered materials • A variety of sample chambers is available to accommodate a wide range of sample sizes • T.A.P. Density option – measures the packing volume and calculates the bulk density of granular and powdered samples The DVVA II measures the dynamic void volume of carbon black and other materials. The void...

Open the catalog to page 8
Micromeritics Products Brochure - 9

Custom-Engineered Products If your work requires an analytical device, technique, or instrument configuration that is not commercially available, talk to us. Micromeritics has a team of scientists and engineers from a wide array of disciplines: electrical, mechanical, software, and chemical engineers; chemists and physicists. Typical customer requests: • • • • • Special data reduction and reporting software Enhanced detection sensitivity Ability to accommodate samples of unusual shapes and sizes Capability to withstand corrosive materials or safely accommodate hazardous ones Designing and...

Open the catalog to page 9
Micromeritics Products Brochure - 10

Micromeritics Analytical Services (MAS) provides contract sample analyses based on the following principles: highquality results, fast turn-around-times, and outstanding customer service. Featuring products manufactured by Micromeritics, MAS also provides additional services outside of Micromeritics’ current product line. Services include: Particle Size Distribution Particle Shape Particulate Count Nano Particle Size B.E.T. Surface Area Micropore Analysis Pore Volume Distribution Total Pore Volume Density Surface Energy Dynamic Water Vapor Sorption TGA DSC Active Surface Area Percent Metal...

Open the catalog to page 10
Micromeritics Products Brochure - 11

Micromeritics Training Center Micromeritics offers basic and advanced training for many of our instruments and applications in the Norcross (Atlanta), Georgia Training Center. With hands-on and classroom training, these courses are essential for laboratory personnel who require in-depth knowledge of their instrument operation and its associated analytical technique. If you supervise people who operate Micromeritics instruments or are an experienced user, these training courses are designed to help you gain more in-depth knowledge. When application needs change or new personnel are added,...

Open the catalog to page 11

All Micromeritics Instrument Corp. catalogs and technical brochures

  1. ASAP™ 2050

    8 Pages

  2. MicroActive

    2 Pages

  3. 3Flex

    9 Pages

  4. ASAP 2460

    5 Pages

  5. ASAP 2420

    5 Pages

  6. DVVA II

    2 Pages

  7. AutoPore V

    8 Pages

Archived catalogs