| | | To ensure best fit with your sample, the AccuPyc is available in multiple configurations. Best iit means your sample nearly iills the sample chamber and, thereiore, optimizes the precision of your results. • 1-cm3 sample chamber • 10-cm3 sample chamber • 100-cm3 sample chamber • 350-cm3 sample chamber Temperature Control Option The temperature-control unit is specifically designed for temperature-sensitive materials. This unit permits collection of volume/density data at a user-specified temperature. A temperature-control unit to which an external bath is connected is available in the following configurations: • 10-cm3 sample chamber • 100-cm3 sample chamber | | This unit consists of two separate modules. The controller is placed outside the glove box, while the analysis module is placed inside the glove box. If you have an existing AccuPyc II 1340, you can order the glove box analysis unit containing the desired sample chamber and simply connect it to the connector provided on the rear panel of the existing AccuPyc II. A glove box unit for analysis of samples in which a controlled environment is required is available in the following configurations: • 1-cm3 sample chamber • 10-cm3 sample chamber • 100-cm3 sample chamber • 350-cm3 sample chamber | | The AccuPyc II 1340 unit can be ordered with the FoamPyc application installed. If you have a standard AccuPyc II 1340, you can upgrade with a software enhancement. A FoamPyc option for measuring open- and closed-cell foam materials is available in the following configurations for the standard and temperature-control pycnometers: • 10-cm3 nominal cell volume • 100-cm3 nominal cell volume (for conformance to ASTM and ISO methods) MultiVolume Option A MultiVolume option allowing you to analyze smaller-sized samples with your current AccuPyc model is available for the following configurations: • 1-cm3 nominal cell volume, contains a 0.1-cm3cup 10-cm3 nominal cell volume, contains 1- and 3.5-cm3 cups 100-cm3 nominal cell volume, contains 10- and 35-cm3 cups | | |