Pressure Switch MPM582
3Pages

{{requestButtons}}

Catalog excerpts

Pressure Switch MPM582 - 1

MPM582 2-Wire Electronics Pressure Switch MPM582 2-Wire Electronics Pressure Switch Features ·Full stainless steel construction, 316L diaphragm, good media compatibility; ·Protection IP65; ·Compact size, easy installation, switch value adjustable; ·NPN and PNP types optional Introduction The product could provide the electric signal which is relative with pressure control relay with 2-wire current loop, it can drive relay or provide switch signal for following electric circuit. The product can be used for flow pressure control of petroleum, chemi-industry, metallurgy, traffic and power station, etc. Specifications Control range: Accuracy: Switch hysteresis: Power supply: Load current: Leak currectcut current: ≤4mADC Inner voltage reduced: Temp. effort: Operation temp.: Operation Mode MPM582 has two operation modes as below: NPN: when measure pressure ≥ setting pressure value Output current = load current http: //www.microsensor.cn Add: No.18,Yingda Road Baoji,P.R.China, 721006 Tel: +86 917 3600739/3600832

Open the catalog to page 1
Pressure Switch MPM582 - 2

MPM582 2-Wire Electronics Pressure Switch PNP: when measure pressure ≤ setting pressure value Output current = load current At other pressure, output current = leak current Please connect with load in the operation, the load should be 200Ω 3kΩ, comsumption≥1/2W. When the user connect with sensing load, please connect parallely suitable capacitance. Outline Construction Unit: mm Electric Connection Application Example http: //www.microsensor.cn Add: No.18,Yingda Road Baoji,P.R.China, 721006 Tel: +86 917 3600739/3600832

Open the catalog to page 2
Pressure Switch MPM582 - 3

MPM582 2-Wire Electronics Pressure Switch 2-Wire Electronic Pressure Switch Code [0X1]X2 kPa or MPa Control range X1=system’s max.pressure X2=Switch’s setting pressure value Operation mode M20×1.5 male, face type seal M20×1.5 male, waterline seal Flush diaphragm, G1/2 male Order Note 1. We suggest switch setting point X2 should be10%100% X1 to make sure relay working stably; 2. NPN and PNP output control method is normal open and normal close model; 3. Please connect parallely capacitance when connect sensing load; 4. Flush diaphragm MPM582 product’s pressure range: 070kPa…35MPa 5. If the...

Open the catalog to page 3

All Micro Sensor Co. catalogs and technical brochures

  1. tri-valve

    2 Pages

  2. MPM489WZ1

    3 Pages

  3. MPM6861G

    4 Pages

  4. M1500

    2 Pages

  5. MFE600

    24 Pages

  6. MPM484C

    3 Pages

  7. Flow Switch

    4 Pages

Archived catalogs

  1. mdm3051s_DP

    13 Pages

  2. MPM489B

    3 Pages