MPM484C
3Pages

Catalog excerpts

Features • 0100mm outline, highlight LED with full 4-digit pressure display • Various power supply optional • RS485 interface with Modbus_RTU protocol, convenient for networking and data transmission • Available for remote setting for zero and span display value and control value • Analog output 4mA~20mADC or 0V~10VDC • 2-way controlling contact, contact value and contact status with any setting available • Return difference setting for each controlling contact to avoid contact chattering, stable operation Introduction MPM/MDM484C pressure controller is a full-digital measurement transmitting controller combining pressure/differential pressure measurement, display, relay control and output together with RS485 interface with Modbus_RTU protocol. It can be installed in pressure/differential pressure measurement places or control panel of test-bed. Users could set many kinds of parameters including zero, span value and controlling contact value by keys and also could realize networking, digital signal transmission and remote setting and calibration for transmitter parameters through RS485 bus function. It is widely used in industrial controlling areas including hydro-power, metallurgy and chemical industry for pressure/differential pressure measurement and control of fluid. MICRO SENSOR CO.,LTD

Open the catalog to page 1

MICRO SENSOR CO,.LTD. MICRO SENSOR CO,.LTD. Electric Connection Relay 1 1, 2, 3—NC, NO and COM of 1st limit contact; 4, 5, 6—NC, NO and COM of 2nd limit contact; 7, 8—Analog output terminal; 9, 10—RS485 terminal；11, 12—AC/DC reuse supply terminal. User’s Software If the users order the product with RS485 interface, we could provide MPM/MDM484C software for users’ use, see below:

Open the catalog to page 2

Range Pressure range: kPa or MPa Pressure -100kPa.. ,0kPa~10kPa.. ,100MPa Differential pressure Code Others C1 M20 x 1.5 male, face type seal 1. Please note the power supply, accuracy, output signal and contact NO. and value in the order. 2. If the users order the product with RS485, we will provide relative software and instruction. Please note it in the order. 3. Process connection could be made based on users’ requirement. If users have any other requirement, please feel free to contact our company. MICRO SENSOR CO.,LTD

Open the catalog to page 3