| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | |
| | | |
| | | o CD | | |
| | | |
| | | 0) | | |
| | | |
| | | All four links: link 1-2 for low speed interface using standard SPI pins link 2-3 tor hfgh speed interface using serial port 2 | | |
| | | □NOI—l- | | |
| | | |
| | | —L | | |
| | | MMC/SO card pirn 9 - D3 p Jlup to 3 1-CS I-Din GMD 4 - Vdd = 3.3U 5-CLK 6 - » = GND 7-DtKJt 5 - D2 p Jlup CO 3 | | |
| | | |
| | | DIPI and DOUT are named In terms of"the VM-1 SIQbuS | | |
| | | |
| | | din Or RXD2 corresponds to tard DOUT dout or TXD2 corresponds to card din | | |
| | | |
| | | |
| | | yse a 2.5mm pitch 10x2 conn&itor at both ands of a 20 way ribbon cable The other end attaches to an Application Board 3 (product code :.. Or Breakout Board (product COdé 5905) JP4 pins If — h1 serial porL 2 Connections are used on the 5B11 board, the serial Internee chip should be removed (U4on the | | |
| | | |
| | | gap | | |
| | | [> and C5 to be placed as d«e to regulator as possible R.6 forces kw limit on ESftr Regulator needs (UR - 1DR Tor stability | | |
| | | |
| | | jxa i | | |
| | | |
| | | |
| | | V,_I Ml'lKlllH | | |
| | | |
| | | O o •* o O O Co | | |
| | | vcc | | |
| | | |
| | | Memory card and 74HC405Q are powered from 3.3V | | |
| | | |
| | | MTMOLE J.(MM VTTI o | | |
| | | Pads and outline tor Optional ojstbmer-fitted external L60 | | |
| | | ■ ;n;i decoupling for 74HC4C5C | | |
| | | |
| | | mt hole | | |
| | | |
| | | |
| | | Decoupling, for MOw&ll&and PCFS?^ | | |
| | | |
| | | |
| | | |
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | |