Universal temperature sensors - MICRO EPSILON - #3

Text version of the page

3 Non-contact measurement of the surface temperature Each Micro-Epsilon IR temperature sensor model incorporates state of the art technology to achieve one goal: Measure accurate and non contact temperature. With this method we can offer a precise, wear free and fully non contact temperature reading without any physical effect or impact on the target. Selectable target distance and spot size Depending on the application and the real estate available, one can choose the ideal distance from the sensor to the target. Due to the many different optics offered, very small spot sizes, even at large distances are possible. Wide temperature range IR Sensors made by Micro-Epsilon cover a huge span of temperature readings. Starting as low as -55°C in cooling processes or labs and measuring up to 1800°C on molten metals, these sensors measure precise and fast within the blink of an eye. Smallest spot-diamter for tiny targets Common IR sensors on the market can not measure temperature of tiny small parts such as leads of ICs, small hot spots on circuit boards, fiber strands etc. Micro-Epsilon offers the most sophisticated optics for the IR sensors to measure with the world’s smallest spot sizes <1mm For fast measurement events Temperature of moving objects and fast events can be captured with the Micro-Epsilon IR sensors which offer the fastest thermopile detector with an exposure <9ms or photon detectors with a response time of 1ms. Even the IR imager takes real time frames every 10ms. Precise and stable measurements Micro-Epsilon’s diversity of spectral ranges from 0.9ìm to 14ìm results in a stable and accurate temperature reading regardless of the application challenge. <0.1°C Software included free With any thermoMETER sensor with digital interface the compactCONNECT software is included for free. - Display, graphic charting and recording of temperature readings - Easy system configuration and sensor calibration - Sophisticated signal processing features - Programming of input and output channels System requirements - Windows XP, Windows 2000 - USB 2.0 - Hard disc min. 30 MByte - min. 128 MByte RAM - CD-ROM drive