THICKNESSCONTROL Series 8310 and 8310 are traversing C-frame systems for non-contact thickness and profile measurement. The system was conceived for materials produced in endless processes, such as battery industrial separators, conveyor belts manufacturers, toothed industrial belts and extruded seal profiles in in-line quality assurance and process control. A unique system, incorporating a revolutionary concept, it has been realized with a combination of the highest precision and robustness. Features: -Repeatability: <1 um -Resolution: <1 um -Measuring rate: Up to 10 kHz -Scalable traversing width: Up to 2,000 mm -Traversing speed: Upto0.2m/s -Vibration-free traversing System advantages - Dynamic measurement with high accuracy and high spatial resolution -Temperature stability through online calibration -Environmentally friendly measurement techniques, no use of isotope or X-ray radiation - Rugged mechanical measurement system designed for harsh industrial environment Mechanical systems In traversing operation the high resolution triangulation sensors need the C-frame to move with low vibration and this is achieved by employing the latest air-bearing technology. The C-frame is supported on a 4-point air bearing against the running surfaces. With an operating pressure of 5 bar a bearing air gap of 6um is obtained. The supposed conflict of air manufacturer of bearings and harsh industrial environments is countered by the application of specially developed cleaning mechanisms. The use of this technology ensures precise measurement with a very high dynamic response. |