| | | | | |
| | Model | MSC710-U MSC710-I | |
| | | 18 ... 30 VDC (18 ... 45 mA) | |
| | Protection | Reverse plarity protection, overvoltage protection | |
| | Sensor principle | for LVDT sensors | |
| | Sensor excitation | 150 ... 400 mV | |
| | 1/2/5 kHz (selectable by DIP-switches) 1 | |
| | Input impedance sensor | 10kOhm 1 | |
| | gain Range zero | -20...+350%(trimpot) | |
| | ±50 % (trimpot) | |
| | Output signal | 2 ... 10 VDC (Ra >1 kOhm) | 4 ...20 mA (load <500 Ohm) | |
| | Noise | <1.5 mVeff* | | |
| | <15mVss | <30/jAss 1 | |
| | Linearity | <0.02 % FSO | |
| | Frequency response | 300 Hz (-3dB) 1 | |
| | storage Temperature range operating | -40°C...+85°C | |
| | 0°C...+70°C | |
| | Temperature stability | ±100pmm/°C | |
| | Protection class | IP 65 | |
| | Weight | 80 g | |
| | Housing material | ABS-plastic | |
| | Electromagnetic compatibility (EMC) | EN 50081-2 (spurious emission) | |
| | EN 50082-2 (immunity to interference) | |
| | Vibration | EN 60068-2-64 (noise) | |
| | Shock | EN 60068-2-29 (continous shock) | |
| | | | | |