| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | |
| | | |
| | | 16 | | |
| | | |
| | | VIP series: sensors with measuring ring and integral electronics | | |
| | | |
| | | No wear and no maintenance Integrated microelectronics Short and compact design Rugged encapsulated sensor construction | | |
| | | |
| | | Parallel mounting The optimum ratio of measurement range to installed length of the sensor reduces the installation space needed for the VIP series. The parallel connection of the measurement object and measuring ring facilitates completely new construction and installation options. Whereas with conventional sensors with an axial measurement path, the length of the plunger must be added to the actual housing length, with the VIP series only the housing length has to be considered during the design. | | |
| | | target movement | | |
| | | |
| | | o o ©i | | |
| | | VIP (fixed) | | |
| | | |
| | | |
| | | measuring ring movement | | |
| | | |
| | | Patented measurement principle There is no mechanical contact between the measuring element (ring) and the sensor rod. The sensor therefore operates withoutanywear. | | |
| | | |
| | | |
| | | VIP series housing version -ZA- Dimensions in mm, not to scale | | |
| | | |
| | | A | | |
| | | | | |
| | | |
| | | | | | | | | | | | | | B „ | „_ measuring range _ | | | | I | | , C „ | f | | | | ]c\jl |s»| | IP | | | | | | | | | | | | | | | |
| | | |
| | | | | | | | | | | | Measuring range | A | B | C | | | | 50 | 105 | 24 | 11.5 | | | | 100 | 175 | 27 | 22 | | | | 150 | 242 | 30 | 33 | | | | | | | | | | | |
| | | 7 | | |
| | | ool si | | |
| | | |
| | | |
| | | / sensor rod measuring ring start position Iout=4mA | | |
| | | 40 | | |
| | | |
| | | measuring ring end position Iout=20mA | | |
| | | |
| | | All data in mm. | | |
| | | |
| | | |
| | | |
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | |