Laser displacement sensors - MICRO EPSILON - #29

/ 36


catalogue search
P. 01
P. 02
P. 03
P. 04
P. 05
P. 06
P. 07
P. 08
P. 09
P. 10
P. 11
P. 12
P. 13
P. 14
P. 15
P. 16
P. 17
P. 18
P. 19
P. 20
P. 21
P. 22
P. 23
P. 24
P. 25
P. 26
P. 27
P. 28
P. 29
P. 30
P. 31
P. 32
P. 33
P. 34
P. 35
P. 36
Pages:


See other catalogues for MICRO EPSILON

Text version of the page
29 Model ILD 1810-50 ILD 2210-10 ILD 2210-20 Measuring range 50mm 10mm 20mm Start of measuring range 550mm 95mm 90mm Midrange 575mm 100mm End of measuring range 600mm 105mm 110mm Linearity 50ėm 3ėm 6ėm 0.1% FSO 0.03% FSO Resolution dynamic 1) 5ėm 0.5ėm 1ėm 0.01% FSO 0.005% FSO Measuring rate 2.5kHz 10kHz Permissable ambient light 10.000lx 30.000lx Spot diameter SMR 400 x 500ėm 130ėm 200ėm MMR 400 x 500ėm 60ėm 60ėm EMR 400 x 500ėm 130ėm 200ėm Light source semiconductor laser <1mW, 670nm (red) Laser safety class class 2 acc. DIN EN 60825-1 : 2001-11 / Class 2 (IEC 60825-1) Class II (FDA) Protection class sensor: IP 65 controller: IP 50 Temperature stability 0.01 % FSO/°C Operation temperature 0 ... 50°C Storage temperature -20 ... 70°C Output analogue ą5V (-10V ... +10V) digital option: RS232 or RS422 RS422 / 687.5kBaud Power supply 24VDC (ą15%), max. 500mA Sensor cable length standard: 2m - integrated option: 5m/10m on request Controller functions: auto zero / signal averaging dimensions: 143mm x 145mm x 52mm - without mounting clips Electromagnetic compatibility (EMC) EN 50081-1 and EN 50082-2 Vibration 2g / 20 ... 500Hz Shock 15g / 6ms / 3 axis Weight sensor ~800g ~500g controller ~1000g FSO = Full Scale Output All specifications apply for a diffusely reflecting matt white ceramic target 1) series 1810: at 2.5 kHz without averaging, series 2210: at 10 kHz without averaging SMR = Start of measuring range MMR = Midrange EMR = End of measuring range Custom Sensor Modifications For applications where the above standard sensors do not meet your requirements, it may be possible to supply a sensor with modified specification. Please contact us for further information. Options - Non standard measuring range and stand off - Custom housing or mounting geometry - Measuring rate 2.5 / 5 / 10 / 20kHz - Non standard signal interfaces - Special cable length of electrical connector - Vacuum suitability - Reduced mass - Increased shock and vibration resistance

pageCatalog pdf di En 2012-05-22-31