| | | | | | | | | | | | | | | | |
| | | |
| | | + + + + + + + + + + + + + + + | | |
| | | |
| | | Optical manufacturer of micrometers in the product group optoCONTROL are based on various measuring principles. Apart from the CCD professional camera technique using laser or LED light, the principle of light quantity measurement is used. The micrometers consist of a light source and a receiver or a CCD camera. The light source produces a parallel continuous through beam sensor which is lined up with the receiver. If an object interrupts the light curtain, this shadow or darkening is detected at the receiver unit. The Series optoCONTROL 1200 here acquires the incident quantity of light, whereas the Series 2500 and 2600 measure the exact shadow via a CCD array. In this way dimensional quantities such as diameter, gap, position and also segment can be acquired. These units use state of the art high speed Ccd cameras manufacturers with solid state technology which eliminates the measurement errors caused by the traditional scanning laser micrometer. | | |
| | | Advantages Various models for different applications Laser- or LED light source Extreme compact construction Very accurate measurements High speed measurements | | |
| | | |
| | | |
| | | During the stamping of threaded rods, micrometers are used for quality assurance in order to determine the exact thread guidance. | | Optical micrometers are used for acquiring roller gaps to ensure a constant gap height. | | |
| | | Synchronized micrometers acquire the vibration of tensioned steel lift cables in order to control the vibration behavior | | |
| | | |
| | | |
| | | |
| | | 22 | | |
| | | |
| | | | | | | | | | | | | | | | |