| | | High speed and variable measuring field Due to the high measuring rate of up to 256,000 measuring points/s, a significant improvement in the cycle times during quality inspection is achieved. Here, the resolution and profile frequency can be set to suit the requirements of the application. If the point resolution of the x-axis is reduced, a correspondingly higher profile frequency can be achieved. With higher point resolution the profile frequency is lower. Apart from the processing rate and number of measuring points to be read out, the height and width of the measuring field can be set, e.g. 512 points over a narrow measuring strip (e.g. for edge detection) or 256 points over a wide strip for high speed applications (e.g. control of professional adhesive beading). Laser Class 3B for difficult surfaces For difficult surfaces such as rubber a special version with the Laser Class 3B is available which compensates for the weak level of reflection by a high light intensity. Consequently, high precision measurements, e.g. on tire rubber, are possible. | | |