General Catalogue - Product Overview - MICRO EPSILON

Catalogue General Catalogue - Product Overview

www.micro-epsilon.com

Page

/ 32

/ 32

See other catalogues for MICRO EPSILON

Text version of the page


										MEASURING RANGES
	Performance capaNCDT									LINEARITY
	Performance capaNCDT									LINEARITY
										RESOLUTION


	capaNCDT 600
	Modular multi-channel system
	Measuring ranges	0.05 -10 mm
	Linearity	<0.2 %
	Resolution	0.004 %
	Measuring rate	6 kHz


	capaNCDT 6100
	Compact single-channel system
	Measuring ranges	0.2 -10 mm
	Linearity	<0.1 %
	Resolution	0.015%
	Measuring rate	2 kHz


	capaNCDT 6019
	Miniature single-channel system
	Measuring ranges	0.2 -10 mm
	Linearity	<1 %
	Resolution	0.01 %
	Measuring rate	500 Hz

Instant sensor swap without recalibration

The unique Micro-Epsilon capacitive technology allows changing any capaNCDT sensor in seconds! Replacing sensors with different measuring ranges and any capaNCDT controllerwithout recalibration.

A sensor swap with capaNCDT needs no more than 5 seconds, while other capacitive systems are not designed for replacing components without the need of individual calibration and linearization.

The nominal range of each single probe can be extended by twofold and custom cable length are available as well.

Instant sensor swap within 5 seconds!

Replace any capaNCDT controller and any capaNCDT sensor within seconds without recalibration!

Non-contact target grounding

Target grounding sometimes can be very difficult or even impossible. Unlike conventional systems due to the unique synchronization of two 6100 systems the target does not require anyelectrical grounding.

The following princple shows two synchronized capaNCDT sensors measuring roller run out. The target does not require to be grounded because of the unique synchronized-non-contact-grounding technology. At the same time any interference caused by electrostatic charge of the target is eliminated.

sync.

No target grounding required with capaNCDT sensors!