MIC5365/6: High Performance Single 150mA LDO - Micrel - #1

/ 15


catalogue search
MIC5365/6: High Performance Single 150mA LDO - Micrel
P. 01
MIC5365/6: High Performance Single 150mA LDO - Micrel
P. 02
MIC5365/6: High Performance Single 150mA LDO - Micrel
P. 03
MIC5365/6: High Performance Single 150mA LDO - Micrel
P. 04
MIC5365/6: High Performance Single 150mA LDO - Micrel
P. 05
MIC5365/6: High Performance Single 150mA LDO - Micrel
P. 06
MIC5365/6: High Performance Single 150mA LDO - Micrel
P. 07
MIC5365/6: High Performance Single 150mA LDO - Micrel
P. 08
MIC5365/6: High Performance Single 150mA LDO - Micrel
P. 09
MIC5365/6: High Performance Single 150mA LDO - Micrel
P. 10
MIC5365/6: High Performance Single 150mA LDO - Micrel
P. 11
MIC5365/6: High Performance Single 150mA LDO - Micrel
P. 12
MIC5365/6: High Performance Single 150mA LDO - Micrel
P. 13
MIC5365/6: High Performance Single 150mA LDO - Micrel
P. 14
MIC5365/6: High Performance Single 150mA LDO - Micrel
P. 15
Pages:
MIC5365/6: High Performance Single 150mA LDO - Micrel


See other catalogues for Micrel

Text version of the page
MIC5365/6 High Performance Single 150mA LDO MLF and MicroLeadFrame are registered trademarks of Amkor Technology, Inc. Micrel Inc. • 2180 Fortune Drive • San Jose, CA 95131 • USA • tel +1 (408) 944-0800 • fax + 1 (408) 474-1000 • http://www.micrel.com September 2009 M9999-090109-C General Description The MIC5365/6 is an advanced general purpose linear regulator offering high power supply rejection (PSRR) in an ultra-small 1mm x 1mm package. The MIC5366 includes an auto-discharge feature that is activated when the enable pin is low. The MIC5365/6 is capable of sourcing 150mA output current and offers high PSRR making it an ideal solution for any portable electronic application. Ideal for battery powered applications, the MIC5365/6 offers 2% initial accuracy, low dropout voltage (155mV @ 150mA), and low ground current (typically 29ìA). The MIC5365/6 can also be put into a zero-off-mode current state, drawing virtually no current when disabled. The MIC5365/6 is available in several advanced packages including a lead-free (RoHS compliant) 1mm x 1mm Thin MLF® occupying only 1mm2 of PCB area, a 75% reduction in board area compared to SC-70 and 2mm x 2mm MLF® packages. It is also availabe in an SC-70-5 package. The MIC5365/6 has an operating junction temperature range of –40°C to 125°C. Data sheets and support documentation can be found on Micrel’s web site at www.micrel.com. Features • Tiny 1mm x 1mm Thin MLF® and SC-70-5 packages • Input voltage range: 2.5V to 5.5V • 150mA guaranteed output current • Stable with 1ìF ceramic output capacitors • Low dropout voltage – 155mV @ 150mA • Excellent Load/Line Transient Response • Low quiescent current – 29ìA • High PSRR – 70dB • Output discharge circuit – MIC5366 • High output accuracy – ±2% initial accuracy • Thermal shutdown and current limit protection Applications • Mobile phones • Digital cameras • GPS, PDAs, PMP, handhelds • Portable electronics ___________________________________________________________________________________________________________ Typical Application VOUT MIC5365/6-xxYMT VIN EN GND 1ìF 1ìF VBAT - Proc I/O - Vibrator motor - Rx/Synth

pageCatalog pdf di En 2012-02-06-10