MIC5302 : 150mA ULDO™ in Ultra Small 1.2mm x 1.6mm Thin MLF® - Micrel - #1

/ 8


catalogue search
MIC5302 : 150mA ULDO™ in Ultra Small 1.2mm x 1.6mm Thin MLF® - Micrel
P. 01
MIC5302 : 150mA ULDO™ in Ultra Small 1.2mm x 1.6mm Thin MLF® - Micrel
P. 02
MIC5302 : 150mA ULDO™ in Ultra Small 1.2mm x 1.6mm Thin MLF® - Micrel
P. 03
MIC5302 : 150mA ULDO™ in Ultra Small 1.2mm x 1.6mm Thin MLF® - Micrel
P. 04
MIC5302 : 150mA ULDO™ in Ultra Small 1.2mm x 1.6mm Thin MLF® - Micrel
P. 05
MIC5302 : 150mA ULDO™ in Ultra Small 1.2mm x 1.6mm Thin MLF® - Micrel
P. 06
MIC5302 : 150mA ULDO™ in Ultra Small 1.2mm x 1.6mm Thin MLF® - Micrel
P. 07
MIC5302 : 150mA ULDO™ in Ultra Small 1.2mm x 1.6mm Thin MLF® - Micrel
P. 08
Pages:
MIC5302 : 150mA ULDO™ in Ultra Small 1.2mm x 1.6mm Thin MLF® - Micrel


See other catalogues for Micrel

Text version of the page
MIC5302 150mA ULDO™ in Ultra Small 1.2mm x 1.6mm Thin MLF® ULDO is a trademark of Micrel, Inc. MLF and MicroLeadFrame are registered trademarks of Amkor Technology, Inc. Micrel Inc. • 2180 Fortune Drive • San Jose, CA 95131 • USA • tel +1 (408) 944-0800 • fax + 1 (408) 474-1000 • http://www.micrel.com May 2008 M9999-051508-E General Description The MIC5302 is an ultra small, Ultra Low Dropout CMOS regulator, ULDO™ that is ideal for today’s most demanding portable applications including cellular phone RF power, camera modules, imaging sensors for digital still and video cameras, PDAs, portable media players (PMP) and PC cameras where board space is limited. It offers extremely low dropout voltage, very low output noise and can operate from a 2.3V to 5.5V input while delivering up to 150mA. It offers 2% initial accuracy, low ground current (typically 85ìA total), thermal and current limit protection. The MIC5302 can also be put into a zero-off-mode current state, drawing no current when disabled. The MIC5302 is available in the ultra small 4-pin 1.2mm x 1.6mm Thin MLF® package, occupying only 1.92mm2 of PCB area, a 50% reduction in board area compared to SC-70 and 2mm x 2mm MLF® packages. It’s operating junction temperature range is –40°C to +125°C and is available in fixed output voltages in lead-free (RoHS compliant) Thin MLF® package. Data sheets and support documentation can be found on Micrel’s web site at www.micrel.com. Features • Ultra Small 1.2mm x 1.6mm Thin MLF® package • Low Dropout Voltage: 50mV at 150mA • Output noise 120ìVrms • Input voltage range: 2.3V to 5.5V • 150mA guaranteed output current • Stable with ceramic output capacitors • Low quiescent current 85ìA total • 35ìs turn-on time • High output accuracy – ±2% initial accuracy – ±3% over temperature • Thermal shutdown and current limit protection Applications • Mobile Phones • PDAs • GPS Receivers • Portable Media Players • Portable Electronics • Digital Still & Video Cameras Typical Application VIN VOUT EN 1ìF GND 1ìF MIC5302-x.xYMT RF LDO Application 0 10 20 30 40 50 60 0 25 50 75 100 125 150 OUTPUT CURRENT (mA) Dropout Voltage vs. Output Current VOUT = 2.8V COUT = 1ìF

pageCatalog pdf di En 2012-02-06-10