MIC4834: Low Noise Dual 220Vp-p EL Driver - Micrel - #1

/ 12


catalogue search
MIC4834: Low Noise Dual 220Vp-p EL Driver - Micrel
P. 01
MIC4834: Low Noise Dual 220Vp-p EL Driver - Micrel
P. 02
MIC4834: Low Noise Dual 220Vp-p EL Driver - Micrel
P. 03
MIC4834: Low Noise Dual 220Vp-p EL Driver - Micrel
P. 04
MIC4834: Low Noise Dual 220Vp-p EL Driver - Micrel
P. 05
MIC4834: Low Noise Dual 220Vp-p EL Driver - Micrel
P. 06
MIC4834: Low Noise Dual 220Vp-p EL Driver - Micrel
P. 07
MIC4834: Low Noise Dual 220Vp-p EL Driver - Micrel
P. 08
MIC4834: Low Noise Dual 220Vp-p EL Driver - Micrel
P. 09
MIC4834: Low Noise Dual 220Vp-p EL Driver - Micrel
P. 10
MIC4834: Low Noise Dual 220Vp-p EL Driver - Micrel
P. 11
MIC4834: Low Noise Dual 220Vp-p EL Driver - Micrel
P. 12
Pages:
MIC4834: Low Noise Dual 220Vp-p EL Driver - Micrel


See other catalogues for Micrel

Text version of the page
MIC4834 Low Noise Dual 220 VPP EL Driver MLF and MicroLead Frame are registered trademark of Amkor Technologies Micrel Inc. • 2180 Fortune Drive • San Jose, CA 95131 • USA • tel +1 (408) 944-0800 • fax + 1 (408) 474-1000 • http://www.micrel.com October 2008 M9999-100808-A General Description The MIC4834 is a low noise dual Electroluminescent (EL) Panel driver used in backlighting applications. The MIC4834 converts a low DC voltage to a high DC voltage using a boost converter and then alternates the high DC voltage across the EL panels using an H-bridge. The MIC4834 incorporates internal wave-shaping circuitry specifically designed to reduce audible noise emitted by EL panels. With only one inductor the MIC4834 can drive two outputs and requires a minimum number of passive components. It features an operating input voltage range of 2.3V to 5.8V, making it suitable for 1-cell Li-ion and 2- or 3-cell alkaline/NiCad/NiMH battery applications. The MIC4834 features separate oscillators for the boost and H-bridge stages. The boost frequency may be adjusted with an external resistor to optimize efficiency and brightness. The H-bridge frequency is internally preset to 225Hz, to reduce the number of external components and layout space. The MIC4834 is available in 10 pin 3mmx3mm MLF® package as well as MSOP-10L, and has an operating junction temperature range of –40°C to +125°C. Features • Drives two EL panels, up to 3 in2 each at full brightness • 220VPP regulated AC output waveform • 2.3V to 5.8V DC input voltage • Wave-shaping circuit to reduce audible noise • Adjustable boost converter frequency • Single inductor to power both panels • 0.1ěA typical shutdown current • Package options - 10-pin 3mmx3mm MLF® - 10-pin MSOP • –40oC to +125oC junction temperature range Applications • Mobile phones • MP3/portable media players (PMP) • Clocks/ watches • Remote controls • Cordless phones • GPS devices • PDAs _________________________________________________________________________________________________ Typical Application Low Noise Dual EL Driver

pageCatalog pdf di En 2012-02-06-10