2.

054 fon +49 (0) 7634 / 50 57 230 F A C T S

Load CharacteristicsFx

(N)

Fy

(N)

Fz

(N)

Mx

(Nm)

My

(Nm)

Mz

(Nm)

k Î± x

(µrad/Nm)

k Î± y

(µrad/Nm)

Special characteristic of the LinearStage DC-B-03150801003060335040 LS-110 is its tough structuralshape. All important parts arefabricated from a highrigid temperedAI-alloy. Linear stages of the structuralseries 2Phase-033 50801003060335040 2Phase-04550801003060335040 LS-110 are mainly suited forindustrial laser treatment. The LinearStage is driven by a recirculating ballscrew with 2mm pitch. Linear guidancesystems with recirculating linear ballbearings guarantee a very high guidestiffness.

Travel Range (mm) 26 52 77 102 155 Bi-directional Repeatability (µm) +/- 0.2 ... 2+/- 1 ... 1.50.001 ... 90+/- 1+/- 30+/- 4029035350.1 (SMC) | 10 (FS)0.1 (SMC) | 10 (FS)10.12 | 241.2 | - 1.2 | -2.6 Accuracy per 25 mm (µm) Velocity Range (mm/sec) Straightness / Flatness (µm) +/- 1.5+/- 40 2.7 +/- 2+/- 50 2.8 +/- 2.5+/- 60 2.9 +/- 3+/- 70 3.1 Pitch (µrad) Yaw (µrad) Ballscrew Pitch (mm) Speed max. (mm/sec)
Technical data DC-B-031 2Phase-033 2Phase-045

Key features

Resolution Open–Loop (µm)

Travel range up to 155 mmMaximum speed 90 mm/sec Load capacity 10 kg Bi-directional repeatability +/- 0.2 µmLinear recirulating ball systemSpecial, tempered Aluminium Limit switches integrated Module combination

2Phase-033 2Phase-045 Resolution Closed–Loop (µm) RE-010, Rotary encoder higher resolution on request LS-010, Linear steel scale Nominal Current (Amps) / Voltage range (Volts)
01/04 Errors and technical modifications are subject to change DC-B-031 2Phase-033 2Phase-045 Weight (kg) Material Special-Alu, black anodized Note: (SMC): Micro-Step Mode, (FS): Full-Step 2Phase (Linear Stage LMS-110 (similar design) but equipped with linear motor. More info: Detailed information, concerning motor and connectors, see: Appendix

Contact us via Internet http://www.micos.ws

ww ww