Systems Positioners Mini Positioners Direct Drives Controllers Manual Positioners Accessories Appendix Linear Stage LS-180
2.
044 fon +49 (0) 7634 / 50 57 230 F A C T S
Load CharacteristicsFx
(N) Fy
(N) Fz
(N) Mx
(Nm) My
(Nm) Mz
(Nm) k α x
(µrad/Nm) k α y
(µrad/Nm) Special characteristic of the LinearStage DC-B-04150020010001324001256050 LS-180 is its tough structuralshape. All important parts arefabricated from a highrigid, temperedAI-alloy. Linear stages of the structuralseries 2Phase-050 50020010001324001256050 LS-180 are mainly suited forindustrial laser treatment. The LinearStage is driven by a recirculating ballscrew with 5 mm pitch. Linear guidancesystems with recirculating linear ballbearings guarantee a very high guidingstiffness. The Linear Stage LS-180 can beused in any fitting position whatever.
Travel Range (mm) 155 205 305 408 508 Bi-directional Repeatability (µm) +/- 0.2 ... 4+/- 1 ... 100.001 ... 100+/- 2+/- 40
+/- 505200400.25 (SMC) I 25 (FS)2.50.13.8 | 242.5 | -8.4 Accuracy per 50 mm (µm) Velocity Range (mm/sec) Straightness / Flatness (µm) +/- 3+/- 5
8.8 +/- 4+/- 60
9.6 +/- 5+/- 70
10.2 +/- 6+/- 80
10.8 Pitch (µrad) Yaw (µrad) Ballscrew Pitch (mm)
Key features
Speed max. (mm/sec)
Technical data DC-B-041
Travel range up to 508 mmMaximum speed 200 mm/sec
Load capacity 100 kg
Bi-directional repeatability +/- 0.2Linear recirculating ball systemSpecial, tempered Aluminium
Limit switches integrated
Module combination
2Phase-050 Resolution Open–Loop (µm) 2Phase-050 Resolution Closed–Loop (µm) RE-010,
Rotary encoder higher resolution on request LS-010, Linear steel scale
01/04 Errors and technical modifications are subject to change Nominal Current (Amps) / Voltage range (Volts) DC-B-041 2Phase-050 Weight (kg) Material Special-Alu, black anodized Note: (SMC): Micro-Step Mode, (FS): Full-Step 2PhaseMore info: Detailed information, concerning motor and connectors, see: Appendix
Contact us via Internet http://www.micos.ws
ww ww