Ordering information

• Insulation function calibration.• Continuity function calibration.• Fault loop impedance calibration with RCD trip-lock function .• Calibration of RCD trip-out time measurement.• Line impedance calibration.• Voltage and frequency calibration.• Measurement leads verification.• PE test terminal functional verification.• Automatic mains polarity verification. Eurocheck is a professional, multifunctional field

Standard set Part. No. CS 2099

- Instrument Eurocheck- Soft carrying bag- Instruction manual - Declaration of warranty

Eurocheck

Comparison table

Instrument Type

Earth-Insulation tester Eurotest

MI 2088MI 2088-20MI 2088-50 MI 2086 EUMI 2086 ST

Instaltest Installcheck

Measurement functions and other

Part No.: MI 2087 MI 2150

INSULATION Insulation Resistance Test voltage 50 V/100 V/250 V/1000 V DC

500 V

Continuity of PE Conductors Automatic polarity exchange, Test current >200 mA CONTINUITY Low Resistance Continuous measurementNo polarity exchange, Low test current

Z
LINE / I
PCS ; L-L, L-N Loop Impedance Z / I
LOOP PCS ; L-PE Contact voltage at I
PCS ; Auxililary test rod method Line Resistance

LINE, LOOP RCD (FI)

R
LINE / I
PCS ; L-N Loop Resistance R
LOOP / I
PCS ; L-PE Loop Resistance L-PE; Without tripping RCD, Test current 15 mA ; (Without tripping the RCD) Earth-Loop resistance ; (Without tripping the RCD) Earth Resistance Test current I
D N /2 (Without tripping the RCD), Auxililary test rod method RCD Trip Out Time ; Test current 0.5I
D N , I
D N , 5I
D N I D N RCD Trip Out Current (Ramp test) RCD Automatic Test Line Impedance Total Earth Resistance ; Test method with four /three / two test rods

// //

Particular Earth Resistance ; Test method with two test rods and one clamp

EARTH

Earth Resistance ; Test method with two clamps Specific Earth resistance ; Test method with four test leads / four test rods Voltage and Current Harmonics

POWER,HARMONICS

(W, VA, Var, cos j ) Energy (Wh)

SENSOROTHER

Illumination Frequency PC SoftwareIEC / EN 61557Installation Tracing Varistor Breakdown Voltage Ramp test voltage 50 up to 1000 V DC; 500 V/sTreshold current 1mA Mains VoltagePower Voltage Logging Current 0,2 mA up to 200 A; Clamp measurement - True RMS PE Terminal Test (presence of phase voltage) Analysis of mains Outlet (Wiring) Phase Rotation Contact voltage (Faults, Fuses, Wires) Plug Commander (Start, Stop, Store)

ACCESSORIES

Tip Commander (Start, Stop, Store)

STANDARD 1, 2, 3, 4, 5, 6, 7

1, 2, 3, 4, 6, 7

1, 2, 4, 5

7

19