Sanding Machines Wood, Routers and Planers, Saws, Special-Purpose Machines, Systematic Organisation
52Pages

SANDINg MAChINES wOOD IT IS ALL AbOuT ThE FINISh: METAbO SANDERS. Getting the right nish on your work piece takes skill and experience. Knowledge on choosing the right sander and accessory for the job also plays its part. Within this section you will see we have sanders for working on large at areas, curved areas, on angles, in corners or for detail work. Our range will cover almost any application. By choosing the right machine to begin with you will be on the right track to achieving that perfect nish. Metabo. work. Don’t play. | 123 Kataloge_Catalogue_Tools_2011_3_en_GB_mm.indd 123 04.03.2011 16:11:10 Uhr

TRI-SANDERS Sanding plates with velcro Order no. Sanding plate, perforated Sanding plate for FMS 200 Intec (as spare) Dimensions: 147 x 100 mm 6.25600* Dust collection box Order no. Dust collector cartridge Dust collector cartridge including dust filter 6.25602 Suitable for sanders/tri-sanders: FMS 200 Intec, FSR 200 Intec Suitable for disc sanders: FSX 200 Intec Multisander FMS 200 Intec Base plate Orbital frequency at no load 100 x 147 mm 6.25601* 26.000 /min Rated input power 200 W Output power 80 W Orbital frequency at rated load 22.000 /min Swing diameter Weight without mains cable...

6.24970* For the triangular base-plate sanders DSE 300 and DSE 300 Intec (as spare) Dimension from corner to corner: 90 mm 6.24992* Special louvre base-plate Order no. Triangular Base-Plate Sander DSE 300 Intec Base plate, dimensions from corner to corner 93 mm Orbital frequency at no load 14.000 - 22.000 /min Orbital frequency at rated load 18.000 /min Rated input power 300 W Swing diameter Special louvre base-plate 6.24971* Velcro-faced at the bottom side. The self-adhesive velcro-faced liner supplied can be fitted to the top of this base-plate so that cling-fit sanding sheets can be...

DISC SANDERS Disc Sander SX E 400 Diameter of backing pad No-load speed 80 mm 5.000 - 10.000 /min Rated input power 220 W Output power 100 W Speed at rated load 6.000 /min Swing diameter 3 mm Weight without mains cable 1,2 kg SX E 400 Very suitable for sanding inner and outer curves Light and handy machine for convenient one-hand operation Rotating and oscillating movement of backing pad for optimum finish Variospeed (V) electronics Thumbwheel for preselection of speed No scratches while placing the running machine on the material (Power Control System) Clean sanding result in narrow rails...

11.000 /min Diameter of backing pad No-load speed 125 mm 5.000 - 11.000 /min Rated input power 240 W Rated input power 250 W Output power 90 W Output power 100 W Speed at rated load Swing diameter Weight without mains cable 9.500 /min 2,7 mm Speed at rated load 7.500 /min Multi-purpose machine for sanding & polishing even and cambered surfaces, wood, plastics, non-ferrous metals, sheet steel 5 mm Weight without mains cable 1,3 kg Swing diameter 1,7 kg Multi-purpose machine for sanding & polishing even and cambered surfaces, wood, plastics, non-ferrous metals, sheet steel Light and handy...

DISC SANDERS Disc Sander SXE 425 TurboTec Disc Sander SXE 450 TurboTec 125 mm 150 mm 4.200 - 11.000 /min 4.200 - 11.000 /min Rated input power 320 W 350 W Output power 160 W 180 W 9.000 /min 8.500 /min 5 mm 2,8/6,2 mm 2 kg 2,2 kg Diameter of backing pad No-load speed Speed at rated load Swing diameter Weight without mains cable SHARED FEATURES TurboBoost switch: allows additional power reserves to be employed for achieving maximum removal Multi-purpose machine for sanding & polishing even and cambered surfaces, wood, plastics, non-ferrous metals, sheet steel Rotating and oscillating...

Order no. Medium- Perfohard rated SXE 400 6.24064* 122 Medium Perforated FSX 200 Intec 6.25658* 125 Soft Perforated SX E 425, SXE 325 Intec 6.31220* 125 Medium- Perfohard rated SX E 425, SXE 325 Intec 6.31219* 150 Soft SX E 425 XL, SXE 450 TurboTec, SX E 450 Duo 6.31156* SX E 425 XL, SX E 450 Duo, SXE 450 TurboTec 6.31158* 150 150 Perforated (6 holes) Medium- Perfohard rated (6 holes) Medium- Perfo­ hard rated (6 or 8 holes) Order no. Dust collector cartridge With pleated filter 6.31980, can be cleaned several times For SXE 425 TurboTec and SXE 450 TurboTec (as spare) Suitable for disc...

Sanders Palm Grip Sander FSR 200 Intec Base plate Orbital frequency at no load SR 20-23 114 x 102 mm 26.000 /min Rated input power 200 W Output power 80 W Orbital frequency at rated load 22.000 /min Swing diameter 1,4 mm Weight without mains cable 1,25 kg Universal use for sanding wood, plastics, metals and varnished surfaces Light and handy machine for convenient one-hand operation Very good weight-performance ratio Vibration-damping, non-slip rubber coated handle Dust-proof ball bearing Velcro-faced base plate and clamp fixture Dust extraction unit with Intec filter system, multiple...

92 x 183 mm 92 x 183 mm 21.700 /min 21.700 /min Rated input power 200 W 210 W Output power 90 W 95 W 18.000 /min 16.000 /min Swing diameter 2,5 mm 2,5 mm Weight without mains cable 1,75 kg 1,8 kg Orbital frequency at no load Orbital frequency at rated load SHARED FEATURES Universal use for sanding wood, plastics, metals and varnished surfaces Robust sander with long service life even under tough conditions Very good weight-performance ratio High material removal Even sanding pattern with high class base plate made of microcellular polyurethane elastomere SR 10-23 Intec Dust extraction unit...

SANDERs Sander Sr 356 Sander Sr 358 Sander Sr E 357 Sander Sr E 359 Base plate 92 x 190 mm 112 x 236 mm 92 x 190 mm 112 x 236 mm Orbital frequency at no load 22.000 /min 22.000 /min 12.000 - 22.000 /min 12.000 - 22.000 /min Rated input power 350 W 350 W 350 W 350 W Output power 190 W 190 W 190 W 190 W 15.000 /min 15.000 /min 15.000 /min 15.000 /min 2,5 mm 2,5 mm 2,5 mm 2,5 mm 2,5 kg 2,7 kg 2,6 kg 2,8 kg Orbital frequency at rated load Swing diameter Weight without mains cable SHARED FEATURES External dust extraction outlet Universal use for sanding wood, plastics, metals and varnished...

Dust bag Without dust bag holder 6.31289, as space, pack of 5 Suitable for sanders/multi-sanders: Sr 356, Sr E 357, Sr 358, Sr E 359 Suitable for disc sanders: SX E 425, SX E 425 XL, SX E 450 Duo Order no. Hole punch non-perforated sanding sheets, In you can use a hole punch to make the holes necessary for dust extraction yourself Length: 230 mm Width: 93 mm 6.31148* Hole punch non-perforated sanding sheets, In you can use a hole punch to make the holes necessary for dust extraction yourself Length: 280 mm Width: 115 mm 6.31149* 6.31288* Dust bag Can be used in the dust bag holder (6.31289)...