Text version of the page

BULLETIN 350

Self Priming Polypro/PVDF - 15550 2500 series

Sethco

®

SELF PRIMING, MAGNETIC DRIVE, SEAL-LESS, CENTRIFUGAL PUMPS

for flows to 225 GPM (50 m

3

/hr) FLOWSTO 225 GPM

500 SERIES SELF-PRIMING MAGNETIC-DRIVE PUMPSPRIMING TIME (3450 RPM) 1000 SERIES SELF-PRIMING MAGNETIC-DRIVE PUMPSPRIMING TIME (3450 RPM)

Sethco ®

3450 RPM2900 RPM

Seal-less, Self Priming, Magnetic Drive Centrifugal Pumps

FEET FEET METERS METERS METERS = 1500 SERIES= 1040W SERIES = 1040N SERIES = 1035N SERIESTests Conducted on 1-1/4" Hose Except for 1500W (1-1/2” Hose)LEGEND = 550 SERIES= 525 SERIES = 510 SERIESTests Conducted on 1" and 1-1/4" HoseLEGEND = 2550 SERIES= 2525 SERIES = 2510 SERIES = 2250 SERIESTests Conducted on 2" Hose LEGEND MINUTES MINUTES 2500 SERIES SELF-PRIMING MAGNETIC-DRIVE PUMPSPRIMING TIME (3450 RPM)

DIMENSIONS PERFORMANCE CURVE PUMPSPECIFICATIONS: FLOW CAPACITIES TO 225 GPM, PRESSURE TO 105 FT. 8 MODELS TO CHOOSE FROM

For CorrosiveLiquid andChemicalTransfer

Motor HPVolts/Phase “A” “M” “P” 3208-230/4603 phase29-7/16" (747mm)11" (279mm)3" (76.2mm)5208-230/4603 phase30-5/16" (770mm)11-7/8" (302mm)3-1/2" (89mm)7.5208-230/4603 phase31-11/16" (805mm)13-1/4" (337mm)3-1/2" (89mm)10208-230/4603 phaseDIMENSIONS VARY, CONSULTFACTORY FEET

Method of Priming

Priming the pump is easy. Simply fill the priming chamberwith liquid through the wide opening at the top. Secure the cover and turn on the pump. When the pump is started, the impeller discharges a mixture of liquid and air into the discharge chamber. The air is separated and vented through the discharge while the liquid is returned to the impeller. This priming liquid continues to draw in more air from the suction line. The cycle continues until all air is evacuated from the suction line and replaced by the liquid to be pumped, at which time the pump is "primed".
MINUTES Model Number Flow Maximum Maximum Motor Characteristics* Weight
† ©COPYRIGHT2003 MET-PRO CORPORATION, SETHCO DIVISION SethcoDivision ® IS AREGISTERED TRADEMARK OF MET-PRO CORPORATION1-04-5M Polypropylene PVDFHeadOperating GPM m
3 /hr Ft. M. Temp. (F / C)HP* Volts Hz. Phase Type Lbs. Kg.PMSP-2505 KMSP-2505 145 3360 18 Polypropylene3 87 40PMSP-2510 KMSP-2510 178 4076 23 180°F / 82°C 5230/460 603 phTEFC109 50 PMSP-2525 KMSP-2525 200 4685 26 PVDF5 109 50 PMSP-2550 KMSP-25502255110532210°F / 99°C7-1/212054

Sethco Division

®

Mailing Address : P.O. Box 12128, Hauppauge, New York 11788-0843 Shipping Address : 70 Arkay Drive, Hauppauge, New York 11788-3773
*Customer supplied external overload protection is required on 3 phase motors. Consult factory for 50 Hz. motor. Explosion proof motors are available Tel : 800-645-0500 ? 631-435-0530 ? Fax : 631-435-0654
† Add approximately 3 pounds for PVDF. Add approximately 20% extra for shipping weight. Website : www.sethco.com ? e-mail: sethcosales@met-pro.com
West Coast Office : 230 N. Crescent Way, Unit I, Anaheim, CA92801 ? Tel: 714-991-0270 ? Fax: 714-991-8107