Seal-less, Self Priming, Magnetic Drive Centrifugal Pumps - Met-Pro Sethco Division - #1

Text version of the page

FLOWS Sethco® TO 225 GPM Seal-less, Self Priming, Magnetic Drive Centrifugal Pumps For Corrosive Liquid and Chemical Transfer BULLETIN 350 Motor HP Volts/Phase “A” “M” “P” 3 208-230/460 3 phase 29-7/16" (747mm) 11" (279mm) 3" (76.2mm) 5 208-230/460 3 phase 30-5/16" (770mm) 11-7/8" (302mm) 3-1/2" (89mm) 7.5 208-230/460 3 phase 31-11/16" (805mm) 13-1/4" (337mm) 3-1/2" (89mm) 10 208-230/460 3 phase DIMENSIONS VARY, CONSULT FACTORY Model Number Flow Maximum Maximum Motor Characteristics* Weight† Polypropylene PVDF Head Operating GPM m3/hr Ft. M. Temp. (F / C) HP* Volts Hz. Phase Type Lbs. Kg. PMSP-2505 KMSP-2505 145 33 60 18 Polypropylene 3 87 40 PMSP-2510 KMSP-2510 178 40 76 23 180°F / 82°C 5 230/460 60 3 ph TEFC 109 50 PMSP-2525 KMSP-2525 200 46 85 26 PVDF 5 109 50 PMSP-2550 KMSP-2550 225 51 105 32 210°F / 99°C 7-1/2 120 54 2500 series for flows to 225 GPM (50 m3/hr) DIMENSIONS PERFORMANCE CURVE PUMP SPECIFICATIONS: FLOW CAPACITIES TO 225 GPM, PRESSURE TO 105 FT. 8 MODELS TO CHOOSE FROM *Customer supplied external overload protection is required on 3 phase motors. Consult factory for 50 Hz. motor. Explosion proof motors are available † Add approximately 3 pounds for PVDF. Add approximately 20% extra for shipping weight. ©COPYRIGHT 2003 MET-PRO CORPORATION, SETHCO DIVISION Sethco Division ® IS A REGISTERED TRADEMARK OF MET-PRO CORPORATION 1-04-5M 500 SERIES SELF-PRIMING MAGNETIC-DRIVE PUMPS PRIMING TIME (3450 RPM) 1000 SERIES SELF-PRIMING MAGNETIC-DRIVE PUMPS PRIMING TIME (3450 RPM) 2500 SERIES SELF-PRIMING MAGNETIC-DRIVE PUMPS PRIMING TIME (3450 RPM) Sethco® SELF PRIMING, MAGNETIC DRIVE, SEAL-LESS, CENTRIFUGAL PUMPS Sethco Division® Mailing Address: P.O. Box 12128, Hauppauge, New York 11788-0843 Shipping Address: 70 Arkay Drive, Hauppauge, New York 11788-3773 Tel: 800-645-0500 • 631-435-0530 • Fax: 631-435-0654 Website: www.sethco.com • e-mail: sethcosales@met-pro.com West Coast Office: 230 N. Crescent Way, Unit I, Anaheim, CA 92801 • Tel: 714-991-0270 • Fax: 714-991-8107 METERS METERS MINUTES FEET FEET FEET = 550 SERIES = 525 SERIES = 510 SERIES Tests Conducted on 1" and 1-1/4" Hose LEGEND = 2550 SERIES = 2525 SERIES = 2510 SERIES = 2250 SERIES Tests Conducted on 2" Hose LEGEND MINUTES Method of Priming Priming the pump is easy. Simply fill the priming chamber with liquid through the wide opening at the top. Secure the cover and turn on the pump. When the pump is started, the impeller discharges a mixture of liquid and air into the discharge chamber. The air is separated and vented through the discharge while the liquid is returned to the impeller. This priming liquid continues to draw in more air from the suction line. The cycle continues until all air is evacuated from the suction line and replaced by the liquid to be pumped, at which time the pump is "primed". METERS MINUTES = 1500 SERIES = 1040W SERIES = 1040N SERIES = 1035N SERIES Tests Conducted on 1-1/4" Hose Except for 1500W (1-1/2” Hose) LEGEND 3450 RPM 2900 RPM