CATALOGO MEP NETWORK 2016 - INGLESE
80Pages

MEp group The MEP Group today represents the latest stage in the evolution of the know-how, technology and values that MEP has developed over a period of 50 years. The MEP Group is present on all major markets and is a leader in those of most importance. The group has production plants in Italy, Canada, the USA and China which produce around 12,000 machines a year. MEP products are sold in over 50 nations around the world thanks to close collaboration with highly qualified local distributors and/or directly controlled subsidiaries (China and Brazil). The MEP Group’s extensive product range...

mep around the world MEP (SUZHOU) CO. LTD (PR. CHINA) MEP (SUZHOU) CO. LTD Suzhou P.R. China

WORKSHOP Enzo Magnani 1959 The TV 300 was MEP’s first series-made abrasive disc cutting machine.

MADE WITH COMMITMENT AND PASSION The MEP Group has firm roots in one of the many entrepreneurial families that thrive in a region rich in hard-working people, history and art. It all began in a small workshop in the historical centre of Pergola, a town in the province of Pesaro-Urbino, in the Marche region of Italy. Enzo Magnani began his career as a mechanic, exploiting the skills he had acquired with British and American forces based in Italy during the Second World War. The ingenuity he showed in his small workshop led to the creation of the first sawing machine, which proved so...

{^} cutting mode AUTOMATIC £ cutting mode SEMI-AUTOMATIC cutting mode SEMI-AUTOMATIC DYNAMIC (IJJJJ cutting mode MANUAL

BANDSAWING MACHINES VERTICAL SAWING MACHINES PIVOT SAWING MACHINES FOR METALS PIVOT SAWING MACHINES MEASURING SYSTEM TECHNICAL FEATURES

without operators, still keeping the manual cutting cycle available ( the HB device is available only in the three-phase version). HB CUTTING CYCLE: - After positioning the bar and closing the vice, the cutting phase is started, using the weight of the saw frame controlled by a hydraulic circuit to adjust the downfeed speed; after the cut the band stops, the frame is manually lifted in order to reposition the bar to cut untill the position needed by the operator, at this point the head frame is locked by the manually-controlled hydraulic valve. A FEW FEATURES: - Sturdy structures in cast...

The PH 261-1, manual band sawing machines for cuts from 0° to 60° on the left are also supplied in a version with HB device to make single cuts without operators, still keeping the manual cutting cycle available. HB CUTTING CYCLE: - After positioning the bar and closing the vice, the cutting phase is started, using the weight of the saw frame controlled by a hydraulic circuit to adjust the downfeed speed; after the cut the band stops, the frame is manually lifted in order to reposition the bar to cut untill the position needed by the operator, at this point the head frame is locked by the...

The PH 262, manual band sawing machines for cuts from -45° to +60° is also supplied in a version with Hydraulic Brake device (HB) to make single cuts without operator but keeping the manual cutting cycle available ( the HB device is available only in the three-phase version). A FEW FEATURES - Sturdy structures in cast iron in order to tension the band at 900 kg. - Sliding vice with sideways movement and fast positioning system. - Electrical board with entirely identifiable wiring, stand-by, main switch with lock, short circuit protection, motor overload cutout, min. voltage coil, low...

PH 262 HB, other than the manual cut mode, the sawing machine can make single cuts without operator HB CUTTING CYCLE: - After positioning the bar and closing the vice, the cutting phase is started, using the weight of the saw frame controlled by a hydraulic circuit to adjust the downfeed speed; after the cut the band stops, the frame is manually lifted in order to reposition the bar to cut untill the position needed by the operator, at this point the head frame is locked by the manually-controlled hydraulic valve. A FEW FEATURES: See PH 262

SHARK 281, manual band sawing machine to cut from 0° to 60° left. The vice on the pneumatic versions (MA) opens and closes by means of a manually operated valve (or by means of a footpedal which is instead optional). A FEW FEATURES: - Electric panel (wiring totally identifiable, standby, loose-key safety switch, main switch, pole change switch, emergency stop, motor magnetothermal overload, minimum tension coil, protection against missing phase, low tension safety device (LTSD 24 V). - IP55 control handle. - Vice with fast clamping device. - Hydraulic transducer to visualize band...

SHARK 281 CCS (Cut Control System) manual bandsawing machine to cut from 0° up to 60° left. Other than the manual cut mode, the sawing machine can make single cuts without operator, using the head weight controlled by a hydraulic brake: after the cut the band stops. The frame at this point is manually lifted to the position needed in order to reposition the bar to cut . In the version with pneumatic vice (MA) the vice is opened/closed by a manually-controlled valve (optional with pedal control). A FEW FEATURES: See SHARK 281.

SHARK 281 SXI evo, semi-automatic, electrohydraulic band sawing machine for cutting from 0° to 60° left. - Machine with controlled single axis microprocessor with the latest generation of controllers for semi-automatic sawing machines designed by MEP. OPERATION: starting the cycle by means of the relative push-button, the following steps are carried out: - the vice closes and the motor starts – the head goes down to execute cut – motor stops – head returns to top position and vice opens. - Standard machine with operation in semiautomatic cycle only, that can be ordered with additional...

high efficiency and low energy consumption. - Double band rotation speed (36/72 m/min) with possibility of ordering the sawing machine with electronic inverter for the continuous adjustment of the band speed (from 15 to 100 m/min). - The limits of the head stroke are programmed through the console, depending on the dimensions of the bars to be cut. - Manually-operated blade tensioning through electronic transducer, with displaying. - Steel base with removable coolant tank. - Electric pump for band lubrication and cooling. - Preset to be equipped with the spray mist system (OPTIONAL), other...