Text version of the page

Panel Interface Connectors (PIC)

A panel interface connector (PIC) is a device that is mounted to the outside (exterior) of a panel that houses a PLC orcomputer. The PIC allows the user to interface the PLC or computer without opening the panel door, thereby, eliminating the potential safety hazards associated with having an open electrical panel.The standard PIC contains one or more of the connectors that are commonly used to interface a PLC, computer or otherdevices that are commonly housed inside the cabinet. The connectors include, but are not limited to, D-subminiature connectors (9, 15, 25, 37 or high density 15 pin), RJ45, RJ11, DIN, BNC, USB and coaxial connectors. Any of these connectors are available alone in a PIC, with a power outlet, or with another connector.
Panel Interface Connectors Currently, we have over 2000 different units in production.The catalog shows the most common types used today.If you do not see what you require please contact us.Custom versions are welcome.Please send a sketch or drawing to the factory for a quoteor visit our website www.mencom.com Standard configurations of the Panel Interface Connectors in NEMA 4 Enclosure (UL FILE # E183955) • All connections are straight through, pin 1 to pin 1, etc. ? All D-Subminiature connectors are FEMALE EXTERIOR and MALE INTERIOR ,referenced to the cabinet. Other configurations such as male exterior and interior are available. ? The 9 pin and 25 D-subs pin configurations are available as a break out configuration in some units.These connectors allow for the D-sub to be separated into individual lines. This allows the user to connectto the D-Sub by way of screw terminal connections. ? All “mini-DIN” and circular DINs are configured FEMALE EXTERIORandINTERIOR. ? Many units are also configured for Allen Bradley’s
® * Data Highway system. In this case the 9 pin D-suband/or 8 pin “mini-DIN” are connected to a 3 pin pluggable terminal block commonly used with “BLUE HOSE” applications. ? The internal power connection is made via a covered terminal block with screw connections. ? The standard reset is a 3 amp to limit the power output of the unit. Other amperages are available,please consult the factory.
260 * Registered trademark of Allen-Bradley Company, LLC Mencom Corporation TEL: 770-534-4585 www.mencom.com