| Adjustable thresholds The electronic system has 2 adjustable thresholds for Minimum- and Maximum-Limits, the Threshholds can be varied over the whole range, independenet from the analog output. A small hysteresis avoids flickering when the signal is close to the threshold. When the signal is lower than MIN, the MIN output is active, when the signal is higher than MAX, the MAX output is active. Between these thresholds, the output is OK, when the object is in the sensor's range. Thresholds are set by default to begin range and end range: MAX: R1 = +10V MIN: R2 = -10V |