| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | |
| | | |
| | | Electronic unit M11 | | |
| | | |
| | | 102 | | |
| | | 27,5 | | |
| | | |
| | | 92 | | |
| | | |
| | | |
| | | Dip Switch Cover | | |
| | | MEL | | |
| | | |
| | | |
| | | LASER Ü'S.Mncff Sensore | | |
| | | |
| | | CD | | |
| | | |
| | | rz | | |
| | | |
| | | Ce | | |
| | | |
| | | Pot4 MAX- | | Pot7 MIN- | | |
| | | weight 300g | | |
| | | |
| | | |
| | | Threshold Threshold | | |
| | | |
| | | |
| | | Dip Switch Cover open | | |
| | | | | |
| | | Dip- I.Schalter | | |
| | | |
| | | |
| | | |
| | | m S O M o s z * x e | | |
| | | |
| | | Pin assignment 25 pin SUB-D connector: | | |
| | | Dip switch settings: | | |
| | | |
| | | |
| | | | | | | | | | Pin | | | | | 1 | Distance output ±10V | | | | 2 | Error +24V/10mA | | | | 3 | Laser OFF, 0V | | | | 4 | TXD | | | | 5 | Range OK, +24V/10mA | | | | 6 | 4 ... 20 mA | | | | 7 | RXD | | | | 8 | 0V supply | | | | 14 | Analog GND | | | | 16 | MAX, +24V/10 mA | | | | 17 | Input Sensor 2 | | | | 18 | RTS | | | | 19 | MIN,+24V/10mA | | | | 20 | Intensity0 ...10 V | | | | 21 | +24 V supply | | | | | | | | | |
| | | | | | | | | | | | SW1 | SW2 | SW3 | adjustment intensity in % ofsaturation | | | | | | | (sampling frequency) | | | | off | off | off | Laser off / adjustment off | | | | off | off | on | adjustment off (sampling frequency 1 kHz) | | | | off | on | off | adjustment off (sampling frequency 5 kHz) | | | | off | on | on | adjustment off (sampling frequency 10 kHz) | | | | on | off | off | 20% | | | | on | off | on | 30% | | | | on | on | off | 40% | | | | on | on | on | 60% | | | | SW4 | SW5 | | Filter | | | | off | off | | Integration off | | | | off | on | | Integration of 2 measurements | | | | on | off | | Integration of4 measurements | | | | on | on | | Integration of 8 measurements | | | | SW6 | SW7 | | plausibility test (deviation of last | | | | | | | measured value) | | | | off | off | | plausibility test off | | | | off | on | | plausibility test 1 (±1% of range) | | | | on | off | | plausibility test 2 (±5% of range) | | | | on | on | | plausibility test 3 (±10% of range) | | | | SW8 | | | | | | | off | | | control by dip switches *) | | | | on | | | control by PC (RS 232) | | | | | | | | | | | |
| | | |
| | | Pin 25 | | |
| | | |
| | | Pin 1 | | |
| | | • Pin 14 | | |
| | | |
| | | |
| | | |
| | | *) default setting (do not change!) | | |
| | | |
| | | RS 232-protocol (115,2 kBaud): Data bits I 7 6 5 4 3 2 1 0 | | |
| | | | | | | | | | | F2 | F1 | Status | | | | off | off | OK | | | | off | on | MIN | | | | on | off | MAX | | | | on | on | Fehler | | | | | | | | | | |
| | | |
| | | Lowbyte Highbyte | | off DB6 DB5 DB4 DB3 DB2 DB1 DB0 on DB11 DB10DB9 DB8 DB7 F2 F1 | | |
| | | |
| | | DB0-11= signed data bits; DB0 = LSB; DB11 = MSB | | |
| | | |
| | | |
| | | DB-M11J-02-E | | |
| | | |
| | | MIKROELEKTRONIK GmbH • Tel. +49 89/327150-0 • Fax +49 89/319 20 23 • www.MELsensor.de | | |
| | | |
| | | -36- | | |
| | | |
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | |