KAT-komplett-Optische-Sensoren_1-00-E - MEL Mikroelektronik

Catalogue KAT-komplett-Optische-Sensoren_1-00-E

www.melsensor.de

Page

/ 42

/ 42

See other catalogues for MEL Mikroelektronik

Text version of the page

Electronic unit M500

Pin assignment

25 pin SUB-D connector:

The M500 is working at DC-operation. For the adaption to fluctuations of the ambient light, the sensor is effecting a correction of this light every 0,125 to 64 ms.

To reach full speed, the sensor should operate in a casing protected against changing light (light bulb or neon lamp).


	Pin
	1	Distance output ±10V
	2	not enough light, +24 V
	4	Impulse for alignment
	5	Range OK, +24 V
	7	external alignment
	8	0V supply
	14	analog GND
	15	too much light, +24 V
	16	MAX, +24 V
	18	Intensity0 ...10 V
	19	MIN, +24V
	21	18...28V, approx. 350 mA

M500 Zero-point cycle Output on pin 4 25 pin connector

24 V

0V-

Dead time 30us

measuring time 0,125 ms ... 64 ms

This zero-point cycle will start automatically all 0,125 to 64 ms. The measuring time can be set by dip switches. If the sensor is going into the zero-point cycle, the zero set output will be high. During this time all other outputs will be undeterminated.


	BR 3	Intervall
	1-2	64 ms
	3-4	32 ms
	5-6	1 ms
	7-8	0,5 ms
	9-10	0,25 ms
	11-12	0,125 ms

—USI}— "f —fEKJ—

—nrrn-

—\MJ—

¡27 021 0 Or

—^R23 h-

^ C15 A -flD— -M>-V - \) -^40^— —nSBH—

3 IC12

» 1+ # « J10 D11 D12 D13

DB-M500_1-00-E

IÌ\ÀlI^ILì MIKROELEKTRONIK GmbH • Tel. +49 89/327150-0 • Fax +49 89/319 20 23 • www.MELsensor.de

-17-