See other catalogues for
MEDER electronic
You may also be interested in
Text version of the page
| | | | | | | | | | | | | | | | | |
| | | |
| | | BE Series | | |
| | | MEDER electronic | | |
| | | |
| | | All Purpose Reed Relays | | |
| | | |
| | | | | | | | | | | | | | | | | | Contact Form | Switch Model | Coil Voltage | Coil Resistance | Pull-In Voltage | Drop-Out Voltage | Nominal Coil Power | | | | | | VDC | Q | VDC | VDC | mW | | | | All Data at 20 °C * | Nom. | Max. | Typ. **** Tolerence ± 10% | Max. | Min. | Typ.**** | | | | | | 5 | | | 7.5 | 140 (345) | 3.5 | 0.75 | 179 (72) | | | | | 66 | 12 | | | 16 | 855 (2145) | 8.4 | 1.8 | 168 (67) | | | | 1A | | 24 | | | 30 | 3285 (7845) | 16.8 | 3.6 | 175 (73) | | | | | 5 | | | 7.5 | 105 (140) | 3.5 | 0.75 | 238 (179) | | | | | 85 | 12 | | | 16 | 620 (1000) | 8.4 | 1.8 | 232 (144) | | | | | | 24 | | | 30 | 1400 (2300) | 16.8 | 3.6 | 411 (250) | | | | | | 5 | | | 7.5 | (180) | 3.5 | 0.75 | 139 | | | | 1B ** | 66 | 12 | | | 16 | (1100) | 8.4 | 1.8 | 131 | | | | | | 24 | | | 30 | (4240) | 16.8 | 3.6 | 136 | | | | | | 5 | | | 7.5 | 345 | 3.5 | 0.75 | 72 | | | | 1C | 90 | 12 | | | 16 | 2145 | 8.4 | 1.8 | 67 | | | | | | 24 | | | 30 | 7845 | 16.8 | 3.6 | 73 | | | | 1E *** | 66 | 5 12 | | | 7.5 16 | 2 x 850 2x 5060 | 3.5 8.4 | 0.75 1.8 | | | | | | | 5 | | | 7.5 | 70 (180) | 3.5 | 0.75 | 357 (139) | | | | 2A | 66 | 12 | | | 16 | 445 (1100) | 8.4 | 1.8 | 324 (131) | | | | | | 24 | | | 30 | 1700 (4240) | 16.8 | 3.6 | 339 (136) | | | | | | 5 | | | 7.5 | 70 (110) | 3.5 | 0.75 | 357 (227) | | | | | 85 | 12 | | | 16 | 420 (600) | 8.4 | 1.8 | 343 (240) | | | | | | 24 | | | 30 | 1080 (1600) | 16.8 | 3.6 | 533 (360) | | | | | | 5 | | | 7.5 | (55) | 3.5 | 0.75 | 455 | | | | 1A1B** | 66 | 12 | | | 16 | (370) | 8.4 | 1.8 | 424 | | | | | | 24 | | | 30 | (1350) | 16.8 | 3.6 | 427 | | | | | | | | | | | | | | | | | |
| | | |
| | | The pull-in / drop-out voltage and coil resistence will change at the rate of 0,4 % per degrees C. * Reclosure of Form B may occur if the max. voltage is exceeded. Coil polarity on Form B must be observed. Pin 2 is positive. ** Coil polarity must be observed. Applying a 2 ms pulse to Coil No. 1 with nominal voltage will latch the contacts. Applying a 2 ms pulse to Coil No. 2 will unlatch the contacts. *** The figures in brackets are for relays in metal casing. | | |
| | | |
| | | www.meder.com | | |
| | | |
| | | 122 | | |
| | | |
| | | | | | | | | | | | | | | | | |
