catalogue search
P. 01
P. 02
P. 03
P. 04
P. 05
P. 06
P. 07
P. 08
P. 09
P. 10
P. 11
P. 12
P. 13
P. 14
P. 15
P. 16
P. 17
P. 18
P. 19
P. 20
P. 21
P. 22
P. 23
P. 24
P. 25
P. 26
P. 27
P. 28
P. 29
P. 30
P. 31
P. 32
P. 33
P. 34
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
You may also be interested in
Archive shelving, Stacker crane, Management software, Wire mesh partition, Storage shelving
Text version of the page
9
PALLET RACKING DRIVE-IN
The forklift trucks travel along the insides of the storage aisles, so the necessary margins
must be calculated in order to work safely. Certain measurements must be taken into
account when designing an installation:
A. Total width of the forklift truck. There must be a minimum tolerance between the
forklift truck and the vertical elements of the racking units of 75 mm on each side.
Dimension X, the distance between the uprights, must include this.
B. Operator's protection structure. A minimum tolerance of 50 mm to the support
rails is needed (dimension Y).
C /D. Height of the base and protection of the forklift truck. Dimension Z and dimension
Y must be cleared comfortably.
E. Maximum elevation height. Must be at least 200 mm greater than dimension W.
A
Y
B
C
D
E
Z
W
X
Figure 2
75 mm