PUNCHES, DIES AND PUNCH RETAINERS - MDL RODIS - #49

Text version of the page

Comment 2: Sequential order of punches and dies according to the general layout below TMX AND TMY-TYPE FORMED PUNCHES AND DIES 4.49 Ordering examples 1 - Ball-lock punch: TMX64 type: BLB Ø13 mm - length L1=71 mm - material B P=8.63 - W=4.13 - L2=16 mm - T90° - Ball-lock die: TMX64 type: BLMB Ø16 mm - height: 32 mm - height of working part: 5 mm P=8.69 - W=4.19 - T90° Standard location of ball bearing contact area at 90° as shown opposite. (Different location upon request) Ordering examples 2 - Round-headed punch TMX64 type: PPB Ø10 mm - length: L1=80 mm - material B P=7.52 - W=3.56 - L2=13 mm - T0° - Headed die bush: TMX64 type: MCB Ø16 mm - height: 32 mm - height of working part: 5 mm P=7.62 - W=3.66 - T0° Standard location of flat at 0° as illustrated. (Different location upon request) 270° 90° 180° 0° TMY-type with concave shapes MDL 02.08 TMX-type with convex shapes Comment 1: Min. radius of 0.2mm can be created on the punch Min. radius of 0.2 mm can be created on the die Comment 3: aTon de ndsieu,r ere tmhee mcobrerre ctot osppeercaiftyio tnh eb ectlweaereann cpeu npcehr face Comment 4: Location of die by a pin is possible upon request. Punch view according to standard sequential order Die view according to standard sequential order