mbo-catalogue / linking technology programme - mbo Oßwald - (Version JPG) - Page n° 9 - PDF Catalogue | Technical Documentation

Clevises similar to DIN 71 752/ Supplement DIN ISO 8140

and according to CETOP standard

mbn

mbo standard 02

bevelling 30' ± 15' r

cone head

*) in this range, respect b1

Example for ordering: Clevis according to CETOP with bore di = 35 mm, slot length g = 54 mm

with metric fine-pitch thread d2 = M 36x2; Clevis G 35x54FG Order number: 18 02 0036 3554


Size	Order number	d1 H 9	g ± 0.5	a1²⁾ h 11	a2 + 0.50 - 0.20	b1 B 13	2 Adm. variation	d2 Regular thread	l¹) Fine-pitch thread	d3	f ± 0.2	11 ± 0.5		2 Adm. variation	13 ± 0.3	r3) ± 0.5	Mass (7.85 kg/dm³) kg ~
G 18x36	10 02 0018 0036	18	36	36		18		M 18x2.5	-	30	1	94	72		27	1.5	0.39
G 18x36FG	16 02 0018 0036	18	36	36		18		-	M 18x1.5	30	1	94	72		27	1.5	0.39
G 20x40	10 02 0020 0040	20	40	40		20		M 20x2.5	-	34	1	105	80		30	1.5	0.55
G 20x40FG*	16 02 0020 0040	20	40	40		20		_-	M 20x1.5	34	1	105	80		30	1.5	0.55
G 20x80	10 02 0020 0080	20	80	40		20		M 20x2.5	-	34	1	145	120		30	1.5	0.8
G 20x80FG	16 02 0020 0080	20	80	40		20		-	M 20x1.5	34	1	145	120		30	1.5	0.8
G 25x50	10 02 0024 2550	25	50	50		25		M 24x3	_-	42	1.5	132	100		36	1.5	1.1
G 25x50FG*	18 02 0024 2550	25	50	50		25		_-	M 24x2	42	1.5	132	100		36	1.5	1.1
G 28x56	10 02 0027 2856	28	56	55		28		M 27x3	-	48	1.5	148	112		40	2	1.5
G 28x56FG	18 02 0027 2856	28	56	55		28		_-	M 27x2	48	1.5	148	112		40	2	1.5
G 30x54FG*	18 02 0027 3054	30	54	55		30		_-	M 27x2	48	1.5	148	110	± 0.4	40	2	1.44
G 30x60	10 02 0030 0060	30	60	60		30	+ 0.15	M 30x3.5	_-	52	1.5	160	120		42	2	1.97
G 30x60FG	18 02 0030 0060	30	60	60		30		_-	M 30x2	52	1.5	160	120		42	2	1.97
G 35x54FG*	18 02 0036 3554	35	54	70		35		-	M 36x2	60	2	188	144		54	3	2.93
G 35x72	10 02 0036 3572	35	72	70		35		M 36x4	_-	60	2	188	144		54	3	2.93
G 35x72FG	18 02 0036 3572	35	72	70		35		_-	M 36x2	60	2	188	144		54	3	2.93
G 36x72	10 02 0036 0072	35	72	70		36		M 36x4	-	60	2	188	144		54	3	2.93
G 36x72FG	18 02 0036 0072	35	72	70		36		-	M 36x2	60	2	188	144		54	3	2.93
G 40x84FG*	18 02 0042 4084	40	84	85		40		_-	M 42x2	70	3	232	168		63.5	5	5.64
G 42x84	10 02 0042 0084	42	84	85		42		M 42x4.5	_-	70	3	232	168		63.5	5	5.34
G 42x84FG	18 02 0042 0084	42	84	85		42		-	M 42x2	70	3	232	168		63.5	5	5.34
G 50x96	10 02 0048 5096	50	96	96		50		M 48x5	-	82	3	265	192		73	5	7.86
G 50x96FG*	18 02 0048 5096	50	96	96		50			M 48x2	82	³	265	192		73	5	7.86
G 50x96FG*	18 02 0048 5096	50	96						M 48x2	82	³	265	192		73	5	7.86

code for thread:

regular thread

regular thread, left-handed

fine-pitch thread

fine-pitch thread, left-handed

no code LH FG FGLH

²⁾ for semifinished products, tolerance h 11 according to DIN 178

³⁾ radius or 45° bevelling (at manufacturer's choice) ') these clevises are according to CETOP RP102P

(except cone head forms)

Special version:

left-handed and other threads or special slot widths "b" and transversal hole upon request

Retaining:

with folding spring bolts (mbo catalogue section 2) or

with bolts (mbo catalogue section 4) and

retainers (mbo catalogue section 13)

or washer and cotter pin;

also see clevis joint combinations

(mbo catalogue section 11) 03 02

Special versions upon request ^01/2007

Material:

1.0718 (11SMnPb30+C) polished oiled or at manufacturer's choice

Surface protection:

optional: phosphatized and oiled, electroplated galvanized; passivated in white-blue (silver/clear) or yellow

General tolerances DIN ISO 2768-medium

Technical alteration rights reserved

mbo Osswald GmbH & Co KG

Metal processing • Linking technology

mbo Osswald GmbH & Co KG - Headquarters: Kuelsheim

District Court - Registration Court - Mannheim Comm. Reg. HRA 570277

D-97900 Kuelsheim-Steinbach • Steingasse 13 Tel: + 49 (0) 93 45 - 670 - 0 Fax: + 49 (0) 93 45 - 62 55 Internet: www.mbo-osswald.com e-mail: info@mbo-osswald.com

We accept no responsibility for incorrect or incomplete details or information given

mbo-catalogue / linking technology programme - mbo Oßwald - #9

Feather key, Bolt, Rigid coupling, Woodruff key, Tangential key