TRS-TT 1/2 Polymer Electric INTERNATIONAL TRADE FAIR FOR ROLLER SHUTTERS, INDUSTRIAL DOORS/INDUSTRIAL GATES AND SUN PROTECTION Product Information Industrial transponder System Doors + Gates Wireless Safety ­ Safety Edges combined with wear-free signal transmission for doors and gates Safe basis For the transmission of safety-related signals on gate systems, Mayser has taken wireless transmission, already established in the bus + train sector, a step further. The wireless transmission system is based on transponder technology. It has been adapted to the special requirements of gate systems: the results are very easy assembly and installation, as well as top reliability and zero wear. And all this is proven and tested at a high level: EN 954 category 3 and SIL2 as per EN 61508. Better safe than sorry. Also without industrial wires: Wireless Safety. Primary circuit Secondary circuit System setup The Transponder System is a system that works irrespective of the tolerances of the overall gate system and it consists roughly of two circuits: Secondary circuit All components are fitted on the moving gate wing. · Safety Edge with integrated switching element and transponder · Tuning box for fast length adaptation · Transponder industrial antenna Primary circuit The components are secured to the gate frame and linked directly to the gate control system. · Transmitting antenna; it serves simultaneously as an energy source for the secondary circuit · Control unit manufacturer with connection to gate control system The setup is always the same irrespective of the type or size of the gate or door Control Unit ­ whether fast acting door, industrial sliding door, SG-TRS 208 Transmitting roller door or overhead sectional door. antenna Reliable and safe. 251006 v1.3 Mayser Polymer Electric Postfach 30 48 89020 Ulm Germany Tel. +49 731 2061-0 Fax +49 731 2061-222