| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | |
| | | |
| | | mayr | | |
| | | ROBA®-switch Type 017._00.2 | | |
| | | |
| | | |
| | | Application ROBA®-switch fast acting rectifiers are used to connect DC consumers to alternating voltage supplies, for example electromagnetic brakes and couplings (ROBA-stop®, ROBA®-quick, ROBATIC®) as well as electromagnets and electrovalves etc. Fast acting rectifier ROBA®-switch 017._00.2 • Consumer operation with overexcitation or power reduction • Input voltage: 100 - 500 VAC • Maximum output current IRMS : 3 A at 250 VAC • UL-approved | | |
| | | cTOus CÇ E189728 Vi Vi | | |
| | | |
| | | |
| | | Function The ROBA®-switch units are used for operation at an input voltage of between 100 and 500 VAC, dependent on size. They can switch internally from bridge rectification output voltage to half-wave rectification output voltage. The bridge rectification time can be modified from 0,05 to 2 seconds by exchanging the external resistor (Rext). | | |
| | | Dimensions (mm) | | |
| | | |
| | | |
| | | Electrical Connection (Terminals) 1 + 2 Input voltage (fitted protective varistor) 3 + 4 Connection for external contact for DC-side switch-off 5 + 6 Output voltage (fitted protective varistor) 7 + 8 R t for bridge rectifier timing adjustment | | |
| | | Type 017.000.2 | | |
| | | |
| | | 54 | | |
| | | |
| | | 04,5 | | |
| | | Gì | | |
| | | io | | |
| | | |
| | | |
| | | | | | | | | | | FT* | | | | DDDDDDDD | T ° CO | | | | 64 | | | | | 54 | | | | ^ 4,5 " | | | | | | | | | |
| | | |
| | | Technical Data Input voltage Output voltage Protection Terminal nom. cross-section Ambient temperature Storage temperature ROBA®-switch Sizes, Table 1 | | |
| | | see Table 1 see Table 1 IP65 components, IP20 terminals, IP10 Rext 1,5 mm2, (AWG 22-14) -25 °C up to +70 °C -40 °C up to +105 °C | | |
| | | Accessories: Mounting bracket set for 35 mm rail acc. to EN 50022: Article-No. 1802911 | | |
| | | |
| | | | |
| | | 131 co 00 | |
| | | |
| | | |
| | | |
| | | Size | | |
| | | |
| | | Type 017.000.2 | | Type 017.100.2 | | |
| | | |
| | | | | | | | | | | | | | 10 | 20 | 10 | 20 | | | | Input voltage VAC ± 10 % | 100 - 250 | 200 - 500 | 100 - 250 | 200 - 500 | | | | Output voltage VDC, Ubndge | 90 - 225 | 180 - 450 | 90 - 225 | 180 - 450 | | | | Output voltage VDC' Uhalf-wave | 45 - 113 | 90 - 225 | 45 - 113 | 90 - 225 | | | | Output current IRMS at < 45 °C, (A) | 2,0 | 1,8 | 3,0 | 2,0 | | | | Output current IRMS at max. 70 °C, (A) | 1,0 | 0,9 | 1,5 | 1,0 | | | | Comformity markings | C€ | up to 300 V C€ | C€ | C€ | | | | | | | | | | | | |
| | | Type 017.100.2 | | |
| | | |
| | | 54 | | |
| | | |
| | | 64 | | |
| | | Accessories: Mounting bracket set for 35 mm rail acc. to EN 50022: Article-No. 1802911 | | |
| | | |
| | | ml | | |
| | | |
| | | |
| | | |
| | | Order Number __ / 0 1 A Size 10 20 | | |
| | | 00 | | |
| | | 7 | | |
| | | |
| | | |
| | | A UL-approved 0 to 300 V 1 to 500 V | | |
| | | | | |
| | | |
| | | |
| | | |
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | |