DATASHEET 75V MODULE - 5 Pages

Add to MyDirectIndustry favorites
DATASHEET 75V MODULE

Catalog excerpts

DATASHEET 75V MODULE FEATURES AND BENEFITS TYPICAL APPLICATIONS Ulta-low internal resistance Highest performance available Temperature monitoring Over 1,000,000 duty cycles Grid/Power quality UPS/Backup for heavy machinery Wind turbine pitch systems PRODUCT SPECIFICATIONS ELECTRICAL Rated Capacitance BMOD0094 P075 B02 94 F 1 Minimum Capacitance, initial Maximum ESR DC, initial 94 F 1 13 mΩ 1 Rated Voltage Absolute Maximum Voltage 75 V 91 V 14 Maximum Continuous Current (ΔT = 15 C) o 48 ARMS 2 Maximum Continuous Current (ΔT = 40oC)2 78 ARMS Maximum Peak Current, 1 second (non repetitive) 1,600 A 3 Leakage Current, maximum (B02 Suffix - Passive Balancing) Maximum Series Voltage 4 50 mA 750 V TEMPERATURE Operating Temperature (Ambient temperature) Minimum -40oC Maximum 65oC Storage Temperature (Stored uncharged) Minimum -40oC Maximum 70oC Page 1 Document number: 1012179.6 maxwell.com

 Open the catalog to page 1

DATASHEET 75V MODULE PRODUCT SPECIFICATIONS (Cont’d) PHYSICAL BMOD0094 P075 B02 Mass, typical 25 kg Power Terminals M8/M10 Recommended Torque - Terminal 20/30 Nm Vibration Specification SAE J2380 Shock Specification - Environmental Protection IP54 Cooling Natural Convection MONITORING / CELL VOLTAGE MANAGEMENT Internal Temperature Sensor RTD Temperature Interface Analog Cell Voltage Monitoring N/A Connector Harting Cell Voltage Management Passive POWER & ENERGY Usable Specific Power, Pd5 Impedance Match Specific Power, Pmax 2,100 W/kg 4,300 W/kg 6 Specific Energy, Emax7 Stored Energy 2.9...

 Open the catalog to page 2

DATASHEET 75V MODULE PRODUCT SPECIFICATIONS (Cont’d) BMOD0094 P075 B02 Cycle Life1,9 1,000,000 cycles Capacitance Change 20% ESR Change 100% Test Current 100 A (% decrease from minimum initial value) (% increase from maximum initial value) Shelf Life 1,10 2 years (Stored uncharged up to a maximum storage temperature) SAFETY Short Circuit Current, typical 5,800 A (Current possible with short circuit from rated voltage. Do not use as an operating current.) Factory High-Pot Test13 2,500 V DC Certifications RoHS TYPICAL CHARACTERISTICS THERMAL CHARACTERISTICS Thermal Resistance (Rma, Module...

 Open the catalog to page 3

DATASHEET 75V MODULE NOTES 1. Capacitance and ESRDC measured at 25°C per Document Number 1007239 available at www.maxwell.com. 2. Per Maxwell Document 1007239 available at www.maxwell.com. ½ CV 3. Maximum Peak current (1 sec) = C x ESRDC + 1 4. After 72 hours at 25°C and rated voltage. Initial leakage current can be higher. 0.12V2 5. Per IEC 62391-2, Pd = ESR x mass DC V2 6. Pmax = 4 x ESRDC x mass 7. Emax = ½ CV2 3,600 x mass MOUNTING RECOMMENDATIONS Please refer to the user manual for installation recommendations Page 4 Document number: 1012179.6 maxwell.com 8. Estored = ½ CV2 3,600 9....

 Open the catalog to page 4

DATASHEET 75V MODULE BMOD0094 P075 4 3 2 1 REVISIONS REV DESCRIPTION CO 1 NEGATIVE TERMINAL PRODUCTION RELEASE - 37.0 D 263 W 126.0 189.0 68.5 C 131.5 POSITIVE TERMINAL 220 H 195 252.0 L 515 183 B Dimensions (mm) NOTICE: W (±0.2mm) DO NOT SCALE DRAWING Part Description A BMOD0094 P075 B02 L (±0.3mm) 515 THE INFORMATION CONTAINED IN THIS DOCUMENT IS MAXWELL CONFIDENTIAL INFORMATION AND IS THE SOLE PROPERTY OF MAXWELL TECHNOLOGIES. ANY REPRODUCTION IN PART OR WHOLE WITHOUT WRITTEN PERMISSION OF MAXWELL TECHNOLOGIES IS PROHIBITED. 263 UNLESS OTHERWISE SPECIFIED, ALL DIMENSIONS ARE IN...

 Open the catalog to page 5

All Maxwell Technologies catalogs and technical brochures

  1. 16V MODULES

    5 Pages

Archived catalogs

  1. Bridge Power

    3 Pages

  2. Voltage Sag

    5 Pages