16V MODULES - 5 Pages

Add to MyDirectIndustry favorites

Catalog excerpts

FEATURES AND BENEFITS* Up to 1,000,000 duty cycles or 10 year DC life 16V DC working voltage Resistive or active cell balancing available Temperature output Overvoltage outputs available High power density Compact, rugged, fully enclosed splash-proof design TYPICAL APPLICATIONS Wind turbine pitch control Transportation Heavy industrial equipment UPS systems PRODUCT SPECIFICATIONSELECTRICAL BMOD0500 P016 B01 BM0D0500 P016 B02 Rated Capacitance1 Minimum Capacitance, initial1 Maximum Capacitance, initial1 Maximum ESR DC, initial1 Test Current for Capacitance and ESRDC1 Rated Voltage Absolute Maximum Voltage2 Absolute Maximum Current Leakage Current at 25°C, maximum (B01 Suffix - VMS 2.0)3 Leakage Current at 25°C, maximum (B02 Suffix - Passive Balancing)3 Maximum Series Voltage Capacitance of Individual Cells11 Maximum Stored Energy, Individual Cell11 Number of Cells TEMPERATURE Operating Temperature (Cell Case Temperature) Minimum Maximum Storage Temperature (Stored Uncharged) Minimum Maximum *Results may vary. Additional terms and conditions, including the limited warranty, apply at the time of purchase. See the warranty details for applicable operating and use requirements. ■ WItechnologies Enabling Energy’s Future"1 Page 1 Document number: 1009363.10 maxwell.com

 Open the catalog to page 1

PRODUCT SPECIFICATIONS (Cont'd) PHYSICAL BMOD0500 P016 B01 Mass, typical Power Terminals Recommended Torque - Terminal Vibration Specification Shock Specification Environmental Protection Cooling MONITORING / CELL VOLTAGE MANAGEMENT Internal Temperature Sensor Temperature Interface Cell Voltage Monitoring Connector Cell Voltage Management POWER & ENERGY Usable Specific Power, Pd4 Impedance Match Specific Power, P Specific Energy, Em Stored Energy, E t NTC Thermistor Analog Overvoltage Alarm Deutsch DTM VMS 2.0 2,700 W/kg 5,500 W/kg 3.2 Wh/kg 18 Wh 5.5 kg M8/M10 20/30 Nm SAE J2380 SAE J2464...

 Open the catalog to page 2

TYPICAL CHARACTERISTICS THERMAL CHARACTERISTICS BMOD0500 P016 B01 Thermal Resistance (R All Cell Cases to ca, Ambient), typical8 Thermal Capacitance (Cth), typical Maximum Continuous Current (AT = 15oC)8 Maximum Continuous Current (AT = 40oC)8 DC Life at High Temperature1 (held continuously at Rated Voltage & Maximum Operating Temperature) Capacitance Change (% decrease from minimum initial value) ESR Change (% increase from maximum initial value) Projected DC Life at 25°C1 (held continuously at Rated Voltage) Capacitance Change (% decrease from minimum initial value) ESR Change (% increase...

 Open the catalog to page 3

1. Capacitance and ESRDC measured at 25°C using specified test current per waveform below. 2. Absolute maximum voltage, non-repeated. Not to exceed 1 second. 3. After 72 hours at rated voltage. Initial leakage current can be higher. 9. Cycle using specified test current per waveform below. 10. Cycle life varies depending upon application-specific characteristics. Actual results will vary. 11. Per United Nations material classification UN3499, all Maxwell ultracapacitors have less than 10 Wh capacity to meet the requirements of Special Provisions 361. Both individual ultracapacitors and...

 Open the catalog to page 4

THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF MAXWELL TECHNOLOGIES INC. ANY REPRODUCTION IN PART OR WHOLE WITHOUT WRITTEN PERMISSION OF MAXWELL TECHNOLOGIES IS PROHIBITED MONITOR CABLE CAGE CODE Part Description Package Quantity Product dimensions are for reference only unless otherwise identified. Product dimensions and specifications may change without notice. Please contact Maxwell Technologies directly for any technical specifications critical to application. All products featured on this datasheet are covered by the following U.S. patents and their respective...

 Open the catalog to page 5

All Maxwell Technologies catalogs and technical brochures

Archived catalogs

  1. Bridge Power

    3 Pages

  2. Voltage Sag

    5 Pages