1-Wire Device Evaluation Kit - Maxim Integrated Products - #1

/ 8


catalogue search
1-Wire Device Evaluation Kit - Maxim Integrated Products
P. 01
1-Wire Device Evaluation Kit - Maxim Integrated Products
P. 02
1-Wire Device Evaluation Kit - Maxim Integrated Products
P. 03
1-Wire Device Evaluation Kit - Maxim Integrated Products
P. 04
1-Wire Device Evaluation Kit - Maxim Integrated Products
P. 05
1-Wire Device Evaluation Kit - Maxim Integrated Products
P. 06
1-Wire Device Evaluation Kit - Maxim Integrated Products
P. 07
1-Wire Device Evaluation Kit - Maxim Integrated Products
P. 08
Pages:
1-Wire Device Evaluation Kit - Maxim Integrated Products


See other catalogues for Maxim Integrated Products

Text version of the page

DS9090K1-Wire Device Evaluation Kit Rev B3

www.maxim-ic.com

GENERAL DESCRIPTION EV KIT CONTENTS/COMPONENT LIST

The DS9090K provides the hardware and software necessary to evaluate and operate 1-Wire
® QTYDESCRIPTION products in an easy-to-use PC environment. All 1-Wire EEPROM, EPROM*, and ROM devices are readable with the DS9090K. All 1-Wire devices with memory or PIO/switches can be written with the DS9090K except 1-Wire EPROM devices*. In this way, the engineer can evaluate 1-Wire chips for potential design purposes or support end-product development activity. Kit operation requires a host PC. Demonstration software consists of the OneWireViewer (a Java™ program). For 32-bit and 64-bit Windows® operating systems, the OneWireViewer comes as part of the 1-Wire Drivers install package. For other operating systems, refer to the online version of the OneWireViewer. 1 PCB: 1-Wire Device Evaluation Board 1 RJ11 male to RJ11 male cable, 7ft 11-Wire USB adapter with RJ11 Maxim DS9490R# 164-bit silicon serial number (3-pin TO92) Maxim DS2401+ 11-Wire addressable switch (6-pin TSOC) Maxim DS2405P+ 11-Wire dual-addressable switch plus 1kb EPROM memory (6-pin TSOC) Maxim DS2406P+ 11-Wire dual-channel addressable switch (6-pin TSOC) Maxim DS2413P+ 11024-bit 1-Wire EEPROM (3-pin TO92) Maxim DS2431+

ORDERING INFORMATION

PART TYPE 14Kb 1-Wire EEPROM (3-pin PR-35) Maxim DS2433+ DS9090K# EV kit
# Denotes a RoHS-compliant device that may include lead that is exempt under the RoHS requirements 14096-Bit Addressable 1-Wire EEPROM with PIO (on EV kit) Maxim DS28E04S-100+
. 120Kb 1-Wire EEPROM (3-pin TO92) Maxim DS28EC20+

EQUIPMENT NEEDED

IBM-Compatible PC Running Windows Vista®, Windows XP SP2, 2003, or 2008 1 Package of 11 2-pin shunts for jumpering Spare USB Port on the PC

TYPICAL SETUP EV KIT BOARD LAYOUT

*EPROM devices, such as the DS2502, DS2506, etc., requireadifferent adapter (DS9097U-E25) to perform an EPROM write. This adapter can be purchased separately and requires a +12 V p ower supply and a 2 5 -pin to 9-pin serial port adapter (refer tothe adapter’s data sheet for details). 1-Wire EPROM devices are available to be sampled (up to quantity 2). 1-Wire is a registered trademark of Dallas Semiconductor Corp., a wholly owned subsidiary of Maxim Integrated Products. Windows and Windows Vista are registered trademarks of Microsoft Corp. Java is a trademark of Sun Microsystems. 1 of 8 REV: 042208

pageCatalog pdf di En 2012-05-22-31